[Request]: Step5 V6.x software

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
segaauto
Posts: 34
Joined: Sat Sep 20, 2008 9:58 pm
Location: Mexico

[Request]: Step5 V6.x software

Post by segaauto » Tue Oct 12, 2010 6:15 am

Hi I need the Step5 V6.x software
can somebody help me

In advance Thanks

Daniel_Brasil
Posts: 18
Joined: Thu Oct 28, 2010 11:29 pm
Location: Brasil

Re: Request: Step5 V6.x software

Post by Daniel_Brasil » Sun Oct 31, 2010 11:58 am

Hello segaauto,

The STEP5 V7.23 don´t work for you?


Bests regards,
Daniel

segaauto
Posts: 34
Joined: Sat Sep 20, 2008 9:58 pm
Location: Mexico

Re: Request: Step5 V6.x software

Post by segaauto » Mon Nov 08, 2010 11:54 pm

No it has to be a version lower tan 7.0

I need to run comm521 basic ver 1.2 and it only runs in Ver 6.X

Thanks.

segaauto

3Mendo
Posts: 5
Joined: Mon Oct 04, 2010 4:39 pm

Re: Request: Step5 V6.x software

Post by 3Mendo » Thu Nov 11, 2010 8:56 pm

Try this (STEP 5 V6.5), I just uploaded it.
https://mega.nz/#F!ha4gmKzY!DmtQsTp-nXhl2wIznvbzdQ
3.5 MB
Good luck... :mrgreen:

segaauto
Posts: 34
Joined: Sat Sep 20, 2008 9:58 pm
Location: Mexico

Re: Request: Step5 V6.x software

Post by segaauto » Sun Nov 14, 2010 4:40 am

Thank you 3Mendo Iinstalled and is running good.

Thanks a lot.

segaauto

3Mendo
Posts: 5
Joined: Mon Oct 04, 2010 4:39 pm

Re: Request: Step5 V6.x software

Post by 3Mendo » Sun Nov 14, 2010 12:40 pm

You're welcome!

Marcio26
Posts: 3
Joined: Mon Jul 26, 2010 4:24 pm

Re: [LINK]: Step5 V6.x software

Post by Marcio26 » Sat Oct 15, 2016 8:01 am

Can you upload it again please?

Shaktalv
Posts: 1
Joined: Fri Nov 11, 2016 8:41 am

Re: [Request]: Step5 V6.x software

Post by Shaktalv » Wed Nov 16, 2016 7:07 am

Please, I need too. Thanks

chai
Posts: 1
Joined: Sat Jun 06, 2020 3:40 am

Re: [Request]: Step5 V6.x software

Post by chai » Sat Jun 06, 2020 3:50 am

support win xp sp3 ????

Answers to FAQs
Faq & Info
Faq & Info
Posts: 94
Joined: Thu Oct 13, 2005 6:42 pm
Location: Frequently Asked Questions – Часто Задаваемые Вопросы

Re: [Request]: Step5 V6.x software

Post by Answers to FAQs » Sat Jun 06, 2020 1:21 pm

STEP5 V7.23 support WinXP sp3

roggab
Posts: 1
Joined: Thu Jun 25, 2020 9:56 am

Re: [Request]: Step5 V6.x software

Post by roggab » Sat Jul 04, 2020 9:06 pm

hmm im trying to resurect an -95 yers lathe that i bought have eprom ckecksum error on it bought a prommer turn out its a seriall prommer so it works with pgs and later versions of step5 6.x for pc
v7 then its not supported so have tried the versions i have found but havent found a real step 5 v6.6 or later
some versions i get to work but not with my seriall prommer
anyone have a working link for v6.6 ?

regards rogga

found out i could use ws800a to read eproms to found a link and installed it anyoing in the manual for ws800a my eprom is shown with a hole bunch of others but in program only a few and not mine :(:(

but im not sure manual and program indicates that i could read eprom from system sinumerik805 with tty cable
well ill se how long im lasting trying else its probably mesa cards/linuxcnc

rogga

Post Reply