plcforum.uz.ua
http://plcforum.uz.ua/

[?]: unDemo IBH SOFTPLC SOFTWARE
http://plcforum.uz.ua/viewtopic.php?f=1&t=13545
Page 1 of 1

Author:  Pokajy [ Fri Sep 03, 2010 1:24 pm ]
Post subject:  [?]: unDemo IBH SOFTPLC SOFTWARE

IBH SOFTPLC SOFTWARE
HI
I hope everyone is ok.

I used Ibh softplc software.
http://www.ibhsoftec-sps.de/english/PLC_S7.htm
It was good But it was demo version. Someone have cracked version? can u share?

I did not try but can we use Winac or Winlc for same work?

I want to make s7 programming without plc hardwares. I'll test my scada programs etc.

Author:  Pokajy [ Mon Sep 13, 2010 9:30 pm ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

can I install rtx and make wincc project with that?

Author:  sania [ Mon Sep 13, 2010 9:34 pm ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

yes , but for s7-plc & wincc you can use plcsim too

Author:  Link [ Sun Oct 10, 2010 10:21 pm ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

so,

IBH Soft PLC / SPS V.4.04
S7-300 and S7-400
with Key

http://www.share-online.biz/download.php?id=OFA073ALROP
or
http://rapidshare.com/files/424341519/SoftSPS_V.4.04.zip

have fun

Author:  Pokajy [ Fri Oct 15, 2010 6:24 am ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

(clap) (clap) (clap) (clap) (clap) (clap)
:mrgreen: :mrgreen: :mrgreen: :mrgreen:
(tyou) (tyou) (tyou) (tyou) (tyou) (tyou)
Thanks alot Link.


Link have you any idea about where we can find cracked SoftPLC S5-943 / S5-945 ?

Author:  suiram [ Fri Dec 24, 2010 3:14 pm ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

Do you also have the IBH OPC Server? (thnx)

Author:  Nedjeljko [ Wed Jan 19, 2011 2:39 pm ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

Is it possible to connect I/O cards to the SoftPLC and how configure HW to the SoftPLC?

Thanks for link - Link (dlink)
(tyou)

Author:  Pokajy [ Thu Jan 20, 2011 5:28 pm ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

Zdravo
yeah it's possible. if u use profibus card like cp5611 u can communicate ur soft plc with real plcs with profibus. or u can use ethernet too. :haha:

There are also PCI cards for pc which can read 4-20mA or 0-10V analog values and u can use this informations in ur soft plc
( pci cards usually needs converters)

Author:  Nedjeljko [ Thu Jan 20, 2011 5:40 pm ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

...thats greath...I can connect ET200M to the CP5512 (have this one in my notebook) and put some cards to the ET200M. (oo) (suc)

Author:  Nedjeljko [ Fri Jan 21, 2011 3:21 pm ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

Hi Pokajy,

After instalation of softPLC, in Step7 stePG/PC interface I dont have profibus comunication for IGH, there is only MPI.
How to configure for example comunication between PC(softPLC) and Et200M with I/O cards (digital Inputs, Outputs...)?

Author:  Pokajy [ Wed Jan 26, 2011 1:13 am ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

Nedjeljko u just need to install driver.
add/remove driver , CIF profibus configuration with PU
u can find guide in manual.
http://ibhsoftec-sps.com/downloads/english/Manuals/S7_SoftPLC_Manual.pdf

But I learnt that as a Profibus hardware ibhsoftplc does not support siemens cp5611 pci card but it supports Hilscher or Beckhoff cards.

If u have cp5611 or similar card u can use winlc rtx.
I've a project with winlc rtx with cp5611 card, I made communication with real plc with using dp/dp coupler via profibus.

as u know ET200M is working with profibus but there is a newer product "IM 153-4 PN" softplc may work with profinet. I'm not sure. We must spend some time on it.

I'm generally using ibhsoftplc for function block tests (boom)

Author:  TaaviM8 [ Thu Aug 04, 2011 12:50 am ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

has anyone tested this also with Braumat/Sistar?

recipeserver is working with this?

Regards,
Taavi

Author:  chelina63 [ Sat Sep 13, 2014 6:47 am ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

Dear Link,
can you upload :

"IBH Soft PLC / SPS V.4.04
S7-300 and S7-400
with Key"
because download links not working,
Thanks

Author:  igormf [ Tue Aug 08, 2017 11:03 pm ]
Post subject:  Re: [?]: unDemo IBH SOFTPLC SOFTWARE

Anybody has this link and is able to share?

Anybody have the serial number? Thanks!

Page 1 of 1 All times are UTC + 3 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/