Page 1 of 1
[?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Fri Sep 03, 2010 10:24 am
by Pokajy
IBH SOFTPLC SOFTWARE
HI
I hope everyone is ok.
I used Ibh softplc software.
http://www.ibhsoftec-sps.de/english/PLC_S7.htm
It was good But it was demo version. Someone have cracked version? can u share?
I did not try but can we use Winac or Winlc for same work?
I want to make s7 programming without plc hardwares. I'll test my scada programs etc.
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Mon Sep 13, 2010 6:30 pm
by Pokajy
can I install rtx and make wincc project with that?
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Mon Sep 13, 2010 6:34 pm
by sania
yes , but for s7-plc & wincc you can use plcsim too
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Sun Oct 10, 2010 7:21 pm
by Link
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Fri Oct 15, 2010 3:24 am
by Pokajy
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Fri Dec 24, 2010 12:14 pm
by suiram
Do you also have the IBH OPC Server?
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Wed Jan 19, 2011 11:39 am
by Nedjeljko
Is it possible to connect I/O cards to the SoftPLC and how configure HW to the SoftPLC?
Thanks for link - Link
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Thu Jan 20, 2011 2:28 pm
by Pokajy
Zdravo
yeah it's possible. if u use profibus card like cp5611 u can communicate ur soft plc with real plcs with profibus. or u can use ethernet too.
There are also PCI cards for pc which can read 4-20mA or 0-10V analog values and u can use this informations in ur soft plc
( pci cards usually needs converters)
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Thu Jan 20, 2011 2:40 pm
by Nedjeljko
...thats greath...I can connect ET200M to the CP5512 (have this one in my notebook) and put some cards to the ET200M.
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Fri Jan 21, 2011 12:21 pm
by Nedjeljko
Hi Pokajy,
After instalation of softPLC, in Step7 stePG/PC interface I dont have profibus comunication for IGH, there is only MPI.
How to configure for example comunication between PC(softPLC) and Et200M with I/O cards (digital Inputs, Outputs...)?
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Tue Jan 25, 2011 10:13 pm
by Pokajy
Nedjeljko u just need to install driver.
add/remove driver , CIF profibus configuration with PU
u can find guide in manual.
http://ibhsoftec-sps.com/downloads/engl ... Manual.pdf
But I learnt that as a Profibus hardware ibhsoftplc does not support siemens cp5611 pci card but it supports Hilscher or Beckhoff cards.
If u have cp5611 or similar card u can use winlc rtx.
I've a project with winlc rtx with cp5611 card, I made communication with real plc with using dp/dp coupler via profibus.
as u know ET200M is working with profibus but there is a newer product "IM 153-4 PN" softplc may work with profinet. I'm not sure. We must spend some time on it.
I'm generally using ibhsoftplc for function block tests
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Wed Aug 03, 2011 9:50 pm
by TaaviM8
has anyone tested this also with Braumat/Sistar?
recipeserver is working with this?
Regards,
Taavi
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Sat Sep 13, 2014 3:47 am
by chelina63
Dear Link,
can you upload :
"IBH Soft PLC / SPS V.4.04
S7-300 and S7-400
with Key"
because download links not working,
Thanks
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Tue Aug 08, 2017 8:03 pm
by igormf
Anybody has this link and is able to share?
Anybody have the serial number? Thanks!
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Sun Jul 28, 2019 8:42 pm
by roadjet
can someone share softplc again?
thanks in advance
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Thu Aug 29, 2019 9:22 pm
by chriss_russell
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Sat Sep 25, 2021 8:02 pm
by CLPGuy
Also looking for this software. Anyone who can post a link?
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Sun Nov 21, 2021 8:14 am
by saksit
Re: [?]: unDemo IBH SOFTPLC SOFTWARE
Posted: Sun Mar 24, 2024 10:27 pm
by jovica007
Please share the crack for IBH OPC SERVER