[?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
racartapo
Posts: 2
Joined: Fri Nov 07, 2008 2:52 am
Location: America

[?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by racartapo » Mon Oct 25, 2021 6:55 am

Hello All,

I really need help to solve an issue that is happening in a Siemens Step 7 PLC CPU 317F-2 PN/DP with a Micro Card Memory 2MB.

This was running well, then went to stop mode and many leds were flashing (SF, BF and Stop). I checked the Program and this was gone, no more program.

I downloaded the program again using the Hardware Configuration password (9991) and all program went properly but when I trying to put this in Run, this goes to Stop mode and shows problems at the PLC Buffer.

PLC Buffer said:
- STOP caused by STOP command, FB number: 1639, Module address: 3084, Previous operating mode: RUN, Requested operating mode: STOP (internal).
- Safety program: internal CPU error, Internal error information: 7:0000, Instance DB no. of the causing F system block: 837, Previous mode: RUN
Requested mode: STOP.

I reset PLC, load again the Program, I replaced the PLC for a new one and nothing works. I didn't replace the Memory Card but I don't know what else what to do.

I tried to open the FC1630 F_CALL to see something and maybe compile but I don't have the Safety Password and I can do nothing.

I really need help to see if anybody can see the Program and tell me the Safety Password and also if anybody can check the Buffer PLC and see if any possible solution or reason why I am having this issues in this machine. Machine is down and pressure is crazy.

Any help will be great appreciate.

Thanks

Here is the Program and Buffer PLC

https://www.mediafire.com/folder/htnz4j ... wrt/shared

ppp
Posts: 265
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by ppp » Mon Oct 25, 2021 4:16 pm

safety pass: 30D608

roberto_battistella
Posts: 64
Joined: Wed Sep 01, 2010 10:20 am

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by roberto_battistella » Mon Oct 25, 2021 6:09 pm

Hello. which tool did you use? for block privacy protection how can it be done? thanks a lot. Hello.

racartapo
Posts: 2
Joined: Fri Nov 07, 2008 2:52 am
Location: America

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by racartapo » Mon Oct 25, 2021 6:27 pm

PPP thanks a lot for your help, I really appreciate that.

Did you have any chance to look the PLC Buffer? just to see what you think could be the problem?

Thanks again !!!!

xflash
Posts: 191
Joined: Sat May 21, 2011 3:28 am

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by xflash » Mon Oct 25, 2021 7:15 pm

ppp wrote:
Mon Oct 25, 2021 4:16 pm
safety pass: 30D608
Wow, welcome back ppp
Please consider updating pss7 for wincc picture password and safety password for Step 5.X.
Welcome back and stay safe!

Gilles Kamgno
Posts: 1
Joined: Sun Nov 28, 2021 1:56 pm

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by Gilles Kamgno » Sun Nov 28, 2021 2:19 pm

hello every one, please i have the same problem, can you help me to get the password of this program
https://drive.google.com/file/d/1z5rTdE ... sp=sharing

Mustablanco
Posts: 18
Joined: Sat Sep 28, 2019 3:07 pm

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by Mustablanco » Mon Feb 21, 2022 8:44 pm

Hello sir i unlocked all the blocks for you, you can downloads it from this link
https://www.mediafire.com/file/69hpoixv ... 2.rar/file

roberto_battistella
Posts: 64
Joined: Wed Sep 01, 2010 10:20 am

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by roberto_battistella » Tue Feb 22, 2022 6:31 am

the safety blocks are still password protected

Mustablanco
Posts: 18
Joined: Sat Sep 28, 2019 3:07 pm

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by Mustablanco » Tue Feb 22, 2022 7:48 pm

roberto_battistella wrote:
Tue Feb 22, 2022 6:31 am
the safety blocks are still password protected
I will send you an image to prove,all the blocks are unlocked 🔓🔓🔓
Can you send me your email address

Mustablanco
Posts: 18
Joined: Sat Sep 28, 2019 3:07 pm

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by Mustablanco » Wed Feb 23, 2022 9:59 am

roberto_battistella wrote:
Tue Feb 22, 2022 6:31 am
the safety blocks are still password protected
You mean the password of the program ,not the protection of the blocks

your password is :123

try it and let me know if work for you

roberto_battistella
Posts: 64
Joined: Wed Sep 01, 2010 10:20 am

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by roberto_battistella » Wed Feb 23, 2022 10:16 am

Ho trovato anche io questa password :-)

Mustablanco
Posts: 18
Joined: Sat Sep 28, 2019 3:07 pm

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by Mustablanco » Wed Feb 23, 2022 11:06 am

roberto_battistella wrote:
Wed Feb 23, 2022 10:16 am
Ho trovato anche io questa password :-)
Its work for you or no????

Buitrungdo
Posts: 1
Joined: Sun Jul 31, 2022 2:19 am

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by Buitrungdo » Sun Jul 31, 2022 2:23 am

i HAVE A SAME PROPBLEM WITH S7 400.

Mustablanco
Posts: 18
Joined: Sat Sep 28, 2019 3:07 pm

Re: [?+]: Step 7 CPU 317F-2 PN/DP - Safety Password

Post by Mustablanco » Sat Aug 06, 2022 1:46 pm

Buitrungdo wrote:
Sun Jul 31, 2022 2:23 am
i HAVE A SAME PROPBLEM WITH S7 400.
What kind of problem you have , i can help you

thanks

Post Reply