PLCforum.uz.ua

PLC_ITA

Sob Sob ...

i'm sorry, i've find this here searching.....

viewtopic.php?f=46&t=4564

PLC_ITA

PLC_ITA

Help !!! (sos) All link KO !!! i need a Intouch 9.5 and license to menage an old project I have a Version: 9.5.001 1101.0110.0018.0002 installed without licence, i have tryed to use the MINE file but during the decoding phase an alarm will be displayed : ATTENTION : Illegal character into input file...

PLC_ITA

Hello friend's, in novice into Tia portal. Usually use S7 . I would like to try new Tia portal and wcc runtime ( lile Wcc 7.0 ) to do this i have intalled a TIA portal (S7 and Wcc v11 found in this site ) --> all ok after this i have create a new project, and into hardware, i have put, a 315 2dp cpu...

PLC_ITA

Hello to all . In my application, i have create through VBS a Exel sheet for my report. One sheet every day.
Now my customer ask to if is possible to print automatically this sheet.
I'm not a VBS big expert, and do not know the vbs code to print.
Enyone can help me ?
thank you to all.
PLC_ITA

PLC_ITA

Hello friends, may be i have a stupid question (boom) I have a plc simatic 300 ( cpu 315 whitout DP port) whith ethernet port. The supervision is Intouch 9.5 ( dassidirect driver ) My plc is I/O full ( only 3 digital input free) and is'nt possible to add a new card. I need to add only one 4-20 mA in...

PLC_ITA

there is'nt a fix rule. Usually is better to have a pump in run to have a correct pressure, and then open the valve

PLC_ITA

(sos) help friends : anyone have a copy of HC3300 software to program an old 53MC5000 fisher & porter instruments ? It's a very old software ( under dos ) . my floppy installation it's impossible to read :( in internet i find this : http://micmod.com/sites/default/files/S-DCI-53MT6000_3.pdf it's the...

PLC_ITA

thank you Schtiel, this is a good suggest, but there is'nt a fisher & porter driver fo 53MC5000 instruments

i search in internet but do not find nothing

PLC_ITA

help friend's
anyone have a driver to communicate whit intouch to Fischer & Porter instrument 53 MC5000

Klinkmann manifacturer have a driver but is protect and work only one hour.

i need also a detail to this proocol ( data link )

anyone can help me

PLC_ITA

HI bilbo, thank you for your help, all ok . 187 k communication speed, with 5512 all ok

PLC_ITA

I'm registered, but when click over the pushbutton, nothing to do,

help please

thank you

PLC_ITA

thank you to all,
i have install microwin in other laptop usually used for s7 300/400 where i have a 5512 card.

to connect microwin with 224, i need a special cable or i can use the same cable used for s7-300/400 ?

PLC_ITA

PLC_ITA

thank you to all. saturday, i hope to ha a possibilities to switch off the plant. there is'nt connection into ppi port. I have already tryed to change a baudrate without result. i'have change the baudrate from microwin. it's correct ? there are other way to change a baudrate ? (h) thank you again fo...

PLC_ITA

helt : how to download the patch from "upload.com.ua" . when i click over download file , a same page is reload !!!

no start a download

thank you !

PLC_ITA

hi, opps, this is a problem. the plc is in run! and during the day it' not possible to put in stop. it's a easy application 2-3 motor a 3/4 photocell. is there a possibility to connect if the port is setting "freeport" ? if i put in stop the plc, are there problems to re put in run aftter connection...

PLC_ITA

Hello friends, i need a suggest to connect my pc with cpu 224 I do not have a big experince with 200 series, only 2-3 time used an old cpu 215 2dp. I use a rs232 <--> PPI converter and microwin. When I try to connect with the CPU 224, this is not found. The software will scan the entire address, but...

PLC_ITA

Hello guy's , anyone have an automation icon set and/or know where i can download .
I would like to make my software more beautiful....

thank you

PLC_ITA

do not think you have too many claims?
if you want a demo project, browse the site and you will find them siemens demo projects for WCC including 7 of the S7 project ->

<-

next time before ask use

viewtopic.php?f=4&t=5725

PLC_ITA

hello to all- No news for polymath ? Anyone have this package ?

thank you

PLC_ITA

opps. For now , no problem but i think is a risk !!

If you have a time for me please uplod ISO. The file that you have suggest, i have already downloaded, but during the installation a cd rom are request !

Thank you

PLC_ITA

PLC_ITA

Hello , i need a help about a vbscript and excel. Few years ago i wrote a script to save data in XLS format, and all ok. Into the system there are WIN XP SP2 - WinCC 6.0 SP4 and EXCEL 97. Now i have only update excel to 2003 and my script does not work and i don't understand why. If i delete excel 2...

PLC_ITA

ISO ?
I have downloaded from this link :
http://www.plcforum.uz.ua/viewtopic.php?f=36&t=5073

there is'nt a ISO file.

Thank you very much, but i have download a SQL 2000 sp4 from microsoft site , an now all OK !

If you have a suggest where i can find iso file , is good for me

PLC_ITA

In old project i have a wcc v6.0 sp3 and sql 2000 sp3 i want to update to wcc 6.0 sp4. to do this, i need to update the sql to Sp4. I have downloaded this package, but during the istallation from hd the system ask a CD rom with SQL 2000 sp4. ??? (h) I have burn a cd with label sql_serv_2k_sp4, but n...

PLC_ITA

Thank you

You are a professionist !

PLC_ITA

my project probably is v6.0 or v6.2 (service pack ?)
do you know a method to read a version ?

PLC_ITA

Hello friend's, my customer send via mail to me a WinCC runtime project but do not know how version has been used to develop the project If i open the project with WCC 7.0 , no problem, but if i modify this project with a incorrect version when will load a modified project , does not work. It's poss...

PLC_ITA

hi, i usually use a cpu 300 with redundancy sw, and im153-2 and other.
Post your configuration hw to understand your problem and if possible, explain better your question

bye

PLC_ITA

stay quiet !

here there are people that work for all GRATIS ! You cannot require an answer after 6 hours !!

Check if the hardware code is correct. If is correct recompile and download the hardware config

PLC_ITA

http://support.automation.siemens.com/W ... reeLang=en

Anyone have this library ?

Thank you in advance

PLC_ITA

hi garibaldik , thank you, but the link does not work.

"The file you are trying to access is temporarily unavailable."

any other link ?

PLC_ITA

thank you KPHCM, but i think that my package is good. I have find a solution : For my experince, the problem is in italian language. First install in english only, and then repair and add italian . All OK I do not why, but after this success, only for test i have re try to install directly in italia...

PLC_ITA

Nothingh to do. The same error also with Virtualbox.

Now i re-download and retry

Anyone have an idea ?

PLC_ITA

thank you for your interest, I have tryed to install into Window 7 ultimate but also in Windows 7 Professional with same result. In both try i have used WmWare virtual Machine . I have istalled only TIA V11 no Wincc , and no other package ( antivirus or other ) tomarrow i search into "logfile" . Any...

PLC_ITA

This is my alarm.
I'ts in italian, in english is :

An errors are occours, and the application is closed. Do you want to restart ?

left button : Restart ---- Right button : Close

if i press restart the same error will be displayed

PLC_ITA

hello, 130 bits or 130 byte ?

Your address db10.dbx0.0 to db10.dbx130.0 = 130 x 8 = 1040 bits

please tell me if you want to read all the bit ar only one bit for every byte.

If you want to read one bit for every byte, please indicate the bit number.

in 2-3 days, i send a code to count bit

PLC_ITA

Hello friends, i need an little help to install TIA V11 I have downloaded the package, decompress : OK Installation of the TIA : OK only one error is displayed ---> "LICENCE ERROR" , but i think because i do not install the licence. install the licence : OK during the startup of TIA 3-4 after the st...

PLC_ITA

(sorry) i'm sorry for this new post, but it's very important for me to know if is possible to have a copy of ZENON SCADA. A big and inportant customer have request that a new project is development whit this package. For me and my collegues is the first time to use ZENON. Before buy this package ( i...

PLC_ITA

Hello friend's for my project i need to use a high temperature material. For the plc no problem i use Siemens with Siplus hardware, but i need also a operator panel. Is only for visualization, no need a touch panel, but i need to use in high temperature ambient : +65°C Siemens do not have into catal...

PLC_ITA

thank you APS_50 .
I have ask the price to Siemens : 8000 €
it'very expansive .

Anyone have another suggest for me

Thank you

PLC_ITA

Hello friend's my customer ask to me to send a e-mail, sms and vocal message when a critical alarm occour. my system is a two cpu 416 ( non redoundant ) an 3 wincc 7.0 station in case of warning i need to send a e-mail and sms in case of critical alarm i need to send a sms, a e-mail and vocal messag...

PLC_ITA

thank you very much

PLC_ITA

thank yuo fr your replay Comod , but nothing to do. One link is dead, and searcing with google no result. I try some site with Excel 97 but after click over the site, the pakege is always excel 2003 or 2010.

any other idea ?

thank you

PLC_ITA

Hello collegues, i have received fram my customer an old application for FH system
All F project are password protect. I have'nt a password for old project.
Is possible to remove and open the application ?

thank you in advance

PLC_ITA

Hello friends, i need an old Excel 97 or MS Office 97 package .
I have only recent excel but
an old application whit macro work only with this version

anyone can suggest where i can find it or anyone may upload ?

thank you in advance

PLC_ITA

Hello collegues, i need F block library 1.3 or greater. I have search but no found

anyone can help me ?

thenk you

PLC_ITA

Serge_n wrote:
PLC_ITA wrote: 2 : in I/O filed you need a dinamic windows and insert the tag / 100
You must enter 'tag/100.00'
This is important for decimal readings.

OPPS... Thank you serge_n for your detail

PLC_ITA

hello, you have 2 way to do this :

1 : in tag management you use a linear scaling in the tag read from the plc

2 : in I/O filed you need a dinamic windows and insert the tag / 100

bye

PLC_ITA

Hello Bjing , i'm sorry for my new question. I have download the HTD2CSV. I have spend 3-4 days to try this application, bat the result are always the same. I have ??? instead a data. My H24 file coming from Ifix 3.0 . In my office system i have install Ifix 4.0 For my try i have copied H24 files in...

PLC_ITA

anyone have this package ?
thank you

PLC_ITA

thank you a lot Bjing. i have try to search a HYD2CSV but no found.

Can you suggest to me a link or site where i can find this file ?

thank you again

Search found 248 matches