PLCforum.uz.ua

Please if anibody has Umvsoft for UMV4301 inverter I need a download link.

From experience, as I work with this kind of things every day. The pump, has a valve that let's the pressure out only whet it reaches a certain pressure. When you give the command, the pump starts at full speed. It is no a problem making the presure fast, the problem is after the valve that you are ...

Has anibody managed to emulate promotic 6 or 8 lpt or usb hardware key ?
http://www.promotic.eu/en/pmdoc/PriceList/PmFree.htm
Thank you.

Solved whith comunication. But password crack does not work whith comspy.
Any brute force method?

Can I make a copy and transfer-it to a new cpu314 IFM whith usb adapter?
This plc does not have a card.

I want to make comuncation cable. I don't know the pinout of the comunication interface conector on plc.
I'm intrested in RX TX , Or rs485 or rs422 pinout.
Thank \You.

Anybody knows the pinout of mitsubishi alpha AL-20MR-D 10 pin connector ?

It work's whith usb too, but not whit this program. Device monitoring studio does the job. ( it is a com sniffer, or spy ). My question, I have logo 24 rc, brand new> Made a copy from another,write'd in this one, but the program clear's (autoerases) every time after I remove the power. Abnibody know...

I copied the flash memory 29f010 am write-d in the other flash. It worked , but still, it's a bad solution.
Still searching for the program for p125 panelware hmi.

I also need to copy from B&R panelware p125 interface, to another the same model. But B&R studio does not support them.
Any help is welcome.

http://www.acd-elektronik.de/en/product ... rives.html

Documentation an software for this servo needed.

Please help.

255. As much as modbus supports.

S7-200 work's whit any rs485 adapter ( ppi protocol), but on the rest of the siemens s7 series you need to buy a original MPI adapter from siemens.

As far as I know, B&R panels and plc's don't support uploading.

Got the idea .
I can't do that as it is a factory in witch the machine that has this cpu will operate.
And already solved whit one piece of td200, nothing fancy but good working.
Thanx for the advice .

Eugene_Shats wrote:

Anybody knows what other HMI then siemens , are compatible whith s7-200?

In case of use OPC-server (such as S7-200 PC Access for example) - anyone.

What do you mean by this ?
I know how to use s7-200 Pc Access.

I have a s7-200 cpu224 whith em235 module, and td200 as HMI. I just need to read a temperature from one pt100 and RPM from the Danfoss Vlt 5000 drive. Whith the temperature was easy, but how to do-it whith the drive? as it has options 4-20 ma, 0-10 V and 0 to 32 khz as I remember. Whath do you recom...

Anybody knows what other HMI then siemens , are compatible whith s7-200?

Sestep 290 password?
Any solution for this?

If anybody can help, I need a manual for wiring, and programming the em 253 positioning module of s7-200.

Problem was solved about 8 months ago ...

Than I was just a beginer like al you other were at one time. I'm still a newbee, but just one question. Whi nobody ever replies? This post was a easy task for 90% of you. The only aswer that I got in this forum was from one guy that is from my country .... Still it remains the best forum that I kno...

Can I link OP277 whith s7-200 cpu224 for a project?
The reason is that this is what I have right now.

T = grey Color code of AC power cords European colors * The live conductor must be brown * The neutral is blue * The earth (' s a fety ground') must be green / yellow This comes from the harmonized cable standards, which are backed up by European legislation. Those color codes are used in fixed wiri...

Already did-it whith the rule of thre :P. The problem is that it goes whith an error. At 40 I have 100 degrees, and at 11 it goes at 25. And I still need 1 degree resolution because it is nicer :D, not that I realy need-it. And btw, the rapid share link is not working, and i have already readed the ...

soclair electronic IR 170f-c
it reads pt 100 from -20 to 100 degrees celsius
on a frequency scale from 10 to 265 hz.
Now it reads a number from 12 ( at 24 degrees) to 40 (at 100 degrees).

ok. I managed to read-it, but just need to know how to scale the range. The scale is aproximatively 3 times bigger.

I have a cpu 224 ac/dc/rly and a temperature to frequency converter 0-265 hz.
Anibody can explayn how to read the temeperature of pt 100?

THANKS

solved
thanx

I have one abb dcs400 inverter dead sudenly.
The light of the panel flashes green and the smaller display inside flashes :

"8."

.
Anybody can help whith any schematic, as I belive te problem is on the board whith the power supply for the logical part.
Thanks.

What machine do you have? I can provide information for seydelman meat cutter mixer, if you have any use of that. Mine has an s7-200 cpu 224 whith em 222 and em 221 slaves , and as hmi a td200.

jumo imago f3000
Does anybodi has any software to copy from a working unit to another that is blank ?
It comunicates trough rs485, an uses jumo PCA3000_pcc software but I have only demo.
http://www3.jumo.de/pio/JUMO/ro_RO/cat/ ... sului.html

Thanx.

solved whith ntst. the quetion was bad posted.
i have 2 nt21-st121b-e and i needed the screen program copied from one to another.
thanx

Can anibody help whith a programing software on serial port for these plc-s Aditech mic 2500 - 2510? Now I am programing the eprom´s individuali whith willeprog, but it woulb be better whith a serial cable. I am clonning the two eproms from one to another at28hc256 & m27c4001 It has infineon c515 ln...