Search found 54 matches

by WH_Mike
Mon Sep 02, 2013 1:16 pm
Forum: Other PLC
Topic: [LINK]: License for GE Fanuc VersaPro V2.04
Replies: 14
Views: 29133

Re: [LINK]: License for GE Fanuc VersaPro V2.04

Hi ! I found VersaPro v2.02 with crack by eMule. In packets v2.02 and v2.04 (links above) cracks are the same. So by analizing source and cracked file VersaPro v2.02, I made crack for v2.04. I try it, all work fine, issues described above not founded. If anybody need it, take it: VersaPro v2.04 with...
by WH_Mike
Wed Aug 28, 2013 6:53 pm
Forum: Other PLC
Topic: [LINK]: License for GE Fanuc VersaPro V2.04
Replies: 14
Views: 29133

Re: [LINK]: License for GE Fanuc VersaPro V2.04

One more mirror: VersaPro v2.04 standard (2003 - 2004), 53 MB: http://www.4shared.com/get/ahbpmJjC/versapro_204_standard.html VersaPro v2.04 with crack (2003 - 2005), 70 MB, copy posted above: http://www.4shared.com/get/T0EeoP_n/VERSAPRO_V2_04_with_crack.html There is some problem with cracked Versa...
by WH_Mike
Sun Aug 11, 2013 10:25 am
Forum: Utilites for Simatic PLC
Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
Replies: 88
Views: 139120

Re: [?]: How to unlock password s7 200 connecting PC/PPI cab

MultidoS
Если не секрет, чем считывали EEPROM и вскрывали пароль?, а также - выпаивали микруху с платы или подключались к ней прямо на плате контроллера?
by WH_Mike
Wed Jul 24, 2013 9:39 pm
Forum: SIMATIC system
Topic: Description of parameters and interface of Datablock
Replies: 1
Views: 1943

Description of parameters and interface of Datablock

Hi ! I have some problem: by opening some DBs I get message 30:504 : "There are no parameter and local variable names available because there is a time-stamp conflict between block interface of the blocks and the description of parameters and variable name." After opening this DBs variables have nam...
by WH_Mike
Tue Jun 04, 2013 10:05 pm
Forum: Utilites for Simatic PLC
Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
Replies: 88
Views: 139120

Re: [?]: How to unlock password s7 200 connecting PC/PPI cab

Наконец добрался до контроллера, но вскрыть пароль все же не удалось. :( Скриншоты программы 2013: http://s2.ipicture.ru/uploads/20130605/thumbs/A7BUWCKb.gif - исходный вид окна при старте (с подписью назначения кнопок), http://s2.ipicture.ru/uploads/20130605/thumbs/E5xVft2Z.gif - после обнаружения ...
by WH_Mike
Tue May 21, 2013 12:21 am
Forum: Utilites for Simatic PLC
Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
Replies: 88
Views: 139120

Re: [?]: How to unlock password s7 200 connecting PC/PPI cab

zerkmax , СПАСИБО за подсказку! Действительно, включил в разделе "Язык для программ не поддерживающих Юникод" язык "Китайский(КНР)", перегрузился и прога заработала! Однако, чтобы этот Китайский язык появился в списке доступных языков, надо на вкладке Языки поставить галочку "Установить поддержку я...
by WH_Mike
Tue Apr 30, 2013 5:53 pm
Forum: Utilites for Simatic PLC
Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
Replies: 88
Views: 139120

Re: [?]: How to unlock password s7 200 connecting PC/PPI cab

Icerazor Таже беда. Перепробовал все три указанные версии 2010, 2012, 2013. 2010 - запускается нормально, но думаю, что пароль для 02.01 не вскроет, так как по дате (14.02.2011) она более древняя, чем в Crack_s7-200CN-UNLOCK_RAR_OK (21.07.2011). К сожалению в данный момент контроллера 02.01 под рук...
by WH_Mike
Fri Apr 26, 2013 7:08 pm
Forum: Utilites for Simatic PLC
Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
Replies: 88
Views: 139120

Re: [?]: How to unlock password s7 200 connecting PC/PPI cab

Сегодня попробовал с помощью Crack_s7-200CN-UNLOCK_RAR_OK вскрыть пароль для скачивания у S7-200 CPU 224 v02.01 - увы, неуспешно. Прога пароль не выдает и, судя повсему, говорит, что работает только с версией 02.00. (no) Может кто знает аналогичную прогу для более новых прошивок CPU? (sbutton) Today...
by WH_Mike
Wed Apr 24, 2013 9:12 pm
Forum: Utilites for Simatic PLC
Topic: [?]: How to unlock password s7 200 connecting PC/PPI cable?
Replies: 88
Views: 139120

Re: [?]: How to unlock password s7 200 connecting PC/PPI cab

Всем привет. Была проблема - не мог скачать бекап программы из CPU 224 v02.00, контроллер требовал пароль для скачивания. Если вкратце, то пароль удалось получить с помощью китайской проги Crack_s7-200CN-UNLOCK_RAR_OK , которой поделился phanvantuan6 (см.выше), за что ему огромное СПАСИБИЩЕ! (clap) ...
by WH_Mike
Tue Jul 10, 2012 10:10 pm
Forum: SIMATIC system
Topic: [?]: Initialization DB by default values
Replies: 3
Views: 4554

Re: [?]: Initialization DB by default values

Thanks Guille! "Why do I need that?" There are couple of reason to do that, fo example: 1) at cold restart to restore settings to eleminates the changes maded at last work period (start mashine always in one start condition, independent from previouse workman manipulation results) 2) to have the abi...
by WH_Mike
Thu Jun 21, 2012 12:34 pm
Forum: SIMATIC system
Topic: [?]: Initialization DB by default values
Replies: 3
Views: 4554

[?]: Initialization DB by default values

Hi! Is it possible to reinitialize data of DB by its default values in programm - is there such FC / FB / SFC / SFB? Or there is only one way - to make another DB with actual values identical default values and at the needed moment to copy them to needed DB? Thanks before, best regards. In Russian: ...
by WH_Mike
Wed Jul 06, 2011 8:24 pm
Forum: Simatic (Russian)
Topic: CPU 313 - не отзывается, мигают все светодиоды
Replies: 2
Views: 3509

Re: CPU 313 - не отзывается, мигают все светодиоды

Спасибо. Заметку нашел:
http://iadt.siemens.ru/forum/viewtopic. ... 8%EE%E4%FB
Посмотрим на резисторы, питание, а дальше, видимо, в ремонт к Сименсу.
(tyou)
by WH_Mike
Tue Jul 05, 2011 7:53 pm
Forum: Simatic (Russian)
Topic: CPU 313 - не отзывается, мигают все светодиоды
Replies: 2
Views: 3509

CPU 313 - не отзывается, мигают все светодиоды

Контроллер CPU 313 перестал работать. Симптомы: 1) нет связи по MPI с PG (Notebook с USB-MPI адаптером) 2) после включения питания кратковременно загораются светодиоды DC5V и STOP, после чего начинают синхронно мигать с частотой 2 раза в секунду все светодиоды (SF, DC5V, FRCE, RUN и STOP) 3) на мани...
by WH_Mike
Mon Aug 16, 2010 5:27 pm
Forum: Other HMI
Topic: [?]: store historical value AI tag from iFIX 3.5 to SQL
Replies: 6
Views: 4286

Re: [?]: store historical value AI tag from iFIX 3.5 to SQL

Большое спаибо!!!
(tyou)
by WH_Mike
Thu Aug 12, 2010 7:14 pm
Forum: Other HMI
Topic: [?]: store historical value AI tag from iFIX 3.5 to SQL
Replies: 6
Views: 4286

Re: [?]: store historical value AI tag from iFIX 3.5 to SQL

Большое спасибо, только обе ссылки - одинаковые, судя по содержанию скачанного - это первая ссылка.
Попробуем разобраться.
by WH_Mike
Thu Aug 12, 2010 11:00 am
Forum: Other PLC
Topic: [?]: Unity Pro - How to Compare Logic of two applications
Replies: 7
Views: 6052

Re: [?]: Unity Pro - How to Compare Logic of two application

Unity Dif realy work, but show differences of initial values variables in structures without name of certain variable (only name of strucktures). Differenses in ST language show correct. Registration makes like here - for Unity Pro - by changing BrickLicenceManager.dll and next registration with any...
by WH_Mike
Thu Aug 12, 2010 9:04 am
Forum: Other PLC
Topic: [?]: Unity Pro - How to Compare Logic of two applications
Replies: 7
Views: 6052

Re: [?]: Unity Pro - How to Compare Logic of two application

If you woud like to detailed compare of two projects (application), so it is not possible. (no) Unity Pro have the tools to only check identical Name, Version and Date of compilation ("Compare") of Project / Application between PC and PLC (Menu->PLC->Compare...) or between PLC Memory and Card (Menu-...
by WH_Mike
Thu Aug 12, 2010 6:39 am
Forum: Other HMI
Topic: [?]: store historical value AI tag from iFIX 3.5 to SQL
Replies: 6
Views: 4286

Re: [?]: store historical value AI tag from iFIX 3.5 to SQL

Надо сохранять в Microsoft SQL Express, чтобы потом можно было обрабатывать эти данные другой, специализированной, программой - строить графики, таблицы, создавать отчеты в нужной форме, что сделать средствами iFIX затруднительно. Саму базу данных в SQL сервере можно, конечно, создать и в ручную (та...
by WH_Mike
Thu Aug 12, 2010 2:27 am
Forum: Other HMI
Topic: [?]: store historical value AI tag from iFIX 3.5 to SQL
Replies: 6
Views: 4286

[?]: store historical value AI tag from iFIX 3.5 to SQL

If anybody now, please explain how to setup iFIX (v3.5) to keep of historical value AI tag (save it) in SQL server? Or give me link to docs, please! (sos) Thanks before and best regards! In Russian: Если кто-нибудь знает, пожалуйста расскажите - как настроить iFIX так, чтобы она писала исторические ...
by WH_Mike
Thu Jul 15, 2010 8:12 pm
Forum: Other PLC
Topic: [?]: Unity - How detect project version?
Replies: 0
Views: 1195

[?]: Unity - How detect project version?

Hello! There is the task: show on the operator panel screen current version and compilation date of controller project (programm). How to find this information by programm operators? System word described in help do not included it (there are only firmware information). May be someone new how to do ...
by WH_Mike
Thu Jul 15, 2010 7:55 pm
Forum: Other PLC
Topic: [?]: Sample Program of Unity Pro
Replies: 6
Views: 3997

Re: [?]: Sample Program of Unity Pro

Reposted sample programm is here.
by WH_Mike
Tue Apr 27, 2010 7:15 pm
Forum: Other PLC
Topic: How to reset %MW by it initial values in Unity Pro?
Replies: 0
Views: 1139

How to reset %MW by it initial values in Unity Pro?

Is it possible to reset %MW by it initial values from Unity Pro in online mode or by using some FB or system bits in programm ?
by WH_Mike
Sun Apr 25, 2010 6:21 pm
Forum: Other HMI
Topic: [?]: Vijeo Designer Lite - Problems with cyrillic symbols
Replies: 0
Views: 2170

[?]: Vijeo Designer Lite - Problems with cyrillic symbols

Hello everybody! I work with Vijeo Designer Lite v1.3. To use russian messages on XBT N400 screens I set project option Language with Cyrillic font. In this case on Vijeo design panels screens instead russian symbols writes "@", but on simulator screens and on real XBT panel screens all symbols show...
by WH_Mike
Sun Dec 27, 2009 10:52 pm
Forum: SIMATIC HMI
Topic: [?]: TD200 Firmware update
Replies: 1
Views: 2882

[?]: TD200 Firmware update

Hello everybody! Happy New Year! :D Is it possible to change firmware (OS v2.1 to v3.0 or reverse) in TD200? If any body know how it can be doing, please explane it and share by firmware and tools. Good luck in new year :!: in Russian: Всем привет! Счастливого рождества и с Новым годом! :D Возможно ...
by WH_Mike
Thu Dec 03, 2009 10:23 pm
Forum: SIMATIC HMI
Topic: [?]: Troubles with OP5
Replies: 10
Views: 6266

Re: [?]: Troubles with OP5

I'm here agan! 1. Alarm buffer was successfully cleared! Project was not deleted! :D Only language was changed on deafault (Italiano), but this setting is easy changed (Menu->Special Func.->Diverse->Language) Great thanks for your advice! 2. Upload project, suddenly, was not made. In OP5 I set: Menu...
by WH_Mike
Wed Dec 02, 2009 6:09 pm
Forum: SIMATIC HMI
Topic: [?]: Troubles with OP5
Replies: 10
Views: 6266

Re: [?]: Troubles with OP5

Greatly Thanks! :P On my home PC there is several OS installed, managed by SYSCOM. With Windows based system COMTEXT did not run at any way, but in clear MSDOS 6.22 it realy work! :mrgreen: To MSDOS run, I have FAT32 on drive "C", so COMTEXT work fine from directory on hard drive "C". Now there I fo...
by WH_Mike
Tue Dec 01, 2009 5:43 pm
Forum: SIMATIC HMI
Topic: [?]: Troubles with OP5
Replies: 10
Views: 6266

Re: [?]: Troubles with OP5

Hi! Today I suddenly find that tested OP5 was get back to customer. So I still not tried to clear alarm buffer, but I hope to try it in nearly future. When I had test connection the OP5 with COMTEXT, I was already susessfully set transfer mode in OP5. Converter V24/TTY <--> RS232 I made myself, so I...
by WH_Mike
Mon Nov 30, 2009 4:15 pm
Forum: SIMATIC HMI
Topic: [?]: Troubles with OP5
Replies: 10
Views: 6266

Re: [?]: Troubles with OP5

Thanks for reply! Tomorrow I'll try to clear buffer by your metod. I have COMTEXT downloaded by link from this forum, have the cable that is OK by result of internal test of RS232 OP5, but can't find the way to upload project or compiled program from OP5 to PC. When I start COMTEXT it says that it d...
by WH_Mike
Sun Nov 29, 2009 11:22 am
Forum: Other PLC
Topic: [?]: Sample Program of Unity Pro
Replies: 6
Views: 3997

Re: [?]: Sample Program of Unity Pro

In previous post was sample with loop blocks placed in different nets.
Here is project with two sample of LD loop placed in single net. I think that you mean this way.

Good luck!
by WH_Mike
Sun Nov 29, 2009 1:06 am
Forum: Other PLC
Topic: [?]: Sample Program of Unity Pro
Replies: 6
Views: 3997

Re: [?]: Sample Program of Unity Pro

Hi!
Your task is much easyer to make in ST language, but it possible in Ladder too (with Jump label).
Test project you may find here
If you try somthing else, post here url to your sample. I'll look at them.

Good luck!
by WH_Mike
Mon Nov 23, 2009 5:58 pm
Forum: Other PLC
Topic: [?]: Sample Program of Unity Pro
Replies: 6
Views: 3997

Re: [?]: Sample Program of Unity Pro

Hi!
Waths loop do you mean?
- in SFC section with STEP connection;
- in LD or FBD section with block connection;
- in ST section - cycle (FOR, REPEAT, WHILE).
What exactly?
by WH_Mike
Mon Nov 16, 2009 12:00 pm
Forum: SIMATIC HMI
Topic: [?]: Troubles with OP5
Replies: 10
Views: 6266

Re: [?]: Troubles with OP5

Thanks for attention!
Without battery will be project deleted?
I don't have COMTEXT and backup copy OP5 project file. So I don't like that project in OP5 will be deleted!
by WH_Mike
Tue Sep 15, 2009 4:02 pm
Forum: SIMATIC HMI
Topic: [?]: Troubles with OP5
Replies: 10
Views: 6266

[?]: Troubles with OP5

Hello! I have OP5 without COMTEXT source project, but in OP5 there is list of 32 possible alarm messages and 0 (no one) event messages. Main troubles is: 1) Once upon at time OP5 was shown 7 alarms, save them in buffer (don't know how) and after it I can't clear them! Standard metod "Menu->Alarms->D...
by WH_Mike
Tue Aug 25, 2009 7:10 pm
Forum: Other HMI
Topic: [LINK]: ifix 4.5 key for russian and other language versions
Replies: 2
Views: 4987

[LINK]: ifix 4.5 key for russian and other language versions

Hello everybody! At last founded the way to use soft license for non english versions iFIX! Here is key for v4.5 and instruction. Enjoy! 8) Всем привет! Наконец найден способ использования программной лицензии (без электронного ключа) для не англоязычных (русских и др.) версий iFIX! Здесь ключик и и...
by WH_Mike
Mon Jul 27, 2009 4:17 pm
Forum: Simatic HMI (Russian)
Topic: [?]: How to connect iClient to iFix
Replies: 3
Views: 3597

У меня заработало! Без лицензии - никак! :evil: Но как только поставить на оба узла (SCADA и iClient) даже не HW (ключ), а soft лицензию (типа license.sys) с соответствующими опциями сетевой работы, тогда узлы начинают друг друга видеть! :D К сожалению, для русского iFIX soft лицензий я пока не виде...
by WH_Mike
Mon Jul 27, 2009 3:41 pm
Forum: Other HMI
Topic: [?]: iFIX DEMO - SCADA and iClient nodes connection?
Replies: 2
Views: 2349

Yes, it is.
As soon I had soft license (even not HW key!) installed on both SCADA and iClient nodes, connection established!
:D
by WH_Mike
Thu Jul 16, 2009 4:01 pm
Forum: Simatic HMI (Russian)
Topic: [?]: How to connect iClient to iFix
Replies: 3
Views: 3597

Сейчас сам занимаюсь этим же вопросом. Теоретически так: 1. На компе узла iClient в файле: ..:\WINDOWS\system32\drivers\etc\hosts прописать IP адрес и имя каждого подключаемого узла сервера. Например, если подключаемый узел сервера имеет логическое имя IFIX_SRV, а установлен он на компе с IP адресом...
by WH_Mike
Wed Jul 15, 2009 2:29 pm
Forum: Other HMI
Topic: [?]: iFIX DEMO - SCADA and iClient nodes connection?
Replies: 2
Views: 2349

[?]: iFIX DEMO - SCADA and iClient nodes connection?

Is it possible to establish connection between iFIX SCADA node and iFIX iClient node in DEMO mode iFIX? If it possible, please give me detailed description what settings must be made. In russian: Возможно ли связать в демо режиме iFIX два узла - SCADA (сервер) и iClient? Если возможно, пожалуйста, у...
by WH_Mike
Wed Mar 18, 2009 5:04 pm
Forum: Other HMI
Topic: [?]: ifix 5.0 KEY
Replies: 10
Views: 18068

How to change date There are 3 bytes in license.sys by offsets 0x76...0x78 that define expired date. But with changing them also changed a few else settings (like max I/O points, Historian points and connections and some others). So, there must be changed several bytes accordingly to eleminate unne...
by WH_Mike
Tue Mar 03, 2009 4:20 pm
Forum: Other HMI
Topic: [?]: ifix 5.0 KEY
Replies: 10
Views: 18068

???????????????????? Only 2015-12-31 Do you need other data? What exactly? To change data is not big problem... :wink: I was try to make for 4.5 russian, but not succeed. :cry: Can try to do for 4.5 english, but can't test it (don't wish to uninstall/install different versions). If anybody need - w...
by WH_Mike
Sun Feb 15, 2009 5:11 pm
Forum: Other HMI
Topic: [?]: ifix 5.0 KEY
Replies: 10
Views: 18068

Here is key for iFIX 5.0 and some optional tools.
I test it. It work!
Здесьможно взять ключик для iFIX 5.0 и некоторых дополнительных утилит.
Проверял. У меня работает!
by WH_Mike
Tue Jan 20, 2009 6:08 pm
Forum: Other PLC
Topic: Request: pnozmulti program for Pilz PLC
Replies: 1
Views: 1998

by WH_Mike
Tue Dec 23, 2008 8:19 am
Forum: SIMATIC system
Topic: [?] Error in FB Interface Table Declaration
Replies: 4
Views: 2915

Great Thank's! It was very helpfully! I was alredy jaded to delete and restore this parameters. I found some interesting things: 1. "Editor Menu - File -> Check and Update Accesses" - lead to disapear this problem in current session editing FB20. 2. After opening and saving FB26 and FB29 (no errors ...
by WH_Mike
Mon Dec 22, 2008 5:19 pm
Forum: SIMATIC system
Topic: [?] Error in FB Interface Table Declaration
Replies: 4
Views: 2915

I try open FB20 with PG2000 v4.89. I never use it before, so I beg you pardon for my dummyes. With opening FB20 PG2000 says: - 9 time: In the parameter-definition of this block is an unknown data type. Would you really want to open it? - and one last time: unknown code in STL After it PG2000 open FB...
by WH_Mike
Mon Dec 22, 2008 11:02 am
Forum: SIMATIC system
Topic: [?] Error in FB Interface Table Declaration
Replies: 4
Views: 2915

[?] Error in FB Interface Table Declaration

Hello! I have next problem with Step7: There is work program uploaded from CPU (315-DP2). Program include FB20, FB26, FB29 and other. FB20 have STAT block with declaration parameters: #STAT115 type FB26 Address 152.0 #STAT149 type FB26 Address 160.0 #STAT183 type FB29 Address 168.0 #STAT200 type FB2...
by WH_Mike
Fri Nov 21, 2008 9:01 pm
Forum: Other PLC
Topic: [LINK]: Pilz PNOZmulti Configurator SN or crack
Replies: 11
Views: 15245

v4.0.2 с ключиком

Here is Pilz PNOZmulti Configurator v4.0.2 with key. And here lie separetely key for v4.0.2. Suddenly, but with other versions its not work. Last versions PNOZmulti Configurator with Demo key you can download, registered before, from there: www.pilz.com In russian: Здесь есть Pilz PNOZmulti Configu...
by WH_Mike
Tue Nov 18, 2008 9:07 am
Forum: PLC's books
Topic: [BOOK]: Hans Berger. Automating With Simatic
Replies: 13
Views: 55349

Here is couple books of Hans Berger in russian with examples: Automating with STEP 7 in LAD and FBD Automating with STEP 7 in STL and SCL or http://www.automation-drives.ru/as/support/documentation/ http://www.automation-drives.ru/as/products/doc.php?l1=Программное%20обеспечение&l2=Базовое%20ПО&l3=d...
by WH_Mike
Mon Nov 17, 2008 5:44 pm
Forum: SIMATIC system
Topic: Request: S7 DB-Initializer by Runmode
Replies: 6
Views: 8038

Had anybody found it?
I need it too!
Please share by this programs!