Search found 31 matches

by jamrobe
Wed Jan 24, 2018 5:02 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [Fishing ?]: RSLogix 5000 - Removing source protection
Replies: 52
Views: 94915

Re: [Fishing ?]: RSLogix 5000 - Removing source protection

Thanks skdatmonster3, used your tool and worked perfect. You are a real genius to get to the bottom of this :)) Now for all other user who are saying cannot use/export .l5x files. If there is not an option to export the routine into a .l5x file this worked for me. Saved the project as .l5K file. Ope...
by jamrobe
Thu Aug 21, 2008 9:00 am
Forum: Drivers and Inverters
Topic: [LINK]: Mitsubishi MR CONFIGURATOR
Replies: 8
Views: 17158

AHA...

Thousands thanks most.

Works perfect.

My regards to you and all our buddies on forum :D
Jam
by jamrobe
Wed Aug 20, 2008 8:31 am
Forum: Drivers and Inverters
Topic: [LINK]: Mitsubishi MR CONFIGURATOR
Replies: 8
Views: 17158

Thanks a lot most

Now it is working, I tested and is OK.

However for 161E on file all menus Open,Save,Print are greyed out.
Do you know the reason for it?
It is because it's working only online?

Regards
Jam
by jamrobe
Tue Aug 19, 2008 11:05 am
Forum: Drivers and Inverters
Topic: [LINK]: Mitsubishi MR CONFIGURATOR
Replies: 8
Views: 17158

MR-Configurator Serial Number -ID

Hi all. From the other links I have downloaded/ installed MR Configurator 81E, 161E, 221EVB1 81E, 161E went OK, but I never worked with them and for some reason on File tab Open, Save and Print are greyed out. I would like to play with the parameters to see how they look like. On 221E they are askin...
by jamrobe
Wed Jul 09, 2008 11:45 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: [?]: configure a MSG instruction from 1 SLC5/04 ,2 SLC5/03
Replies: 3
Views: 3970

If you do not have already a MSG setup on other PLC, just take the book or read the help. It is not so complicated. But your problem is that too many words. One MSG instruction will transfer maximum 103 words. So you will need at least 18MSG's But wait , you have them spread over 65 files, so you wi...
by jamrobe
Wed Jul 09, 2008 11:02 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: [?]: Cable mini Din 8pin for MICROLOGIX 1500
Replies: 2
Views: 4294

Try here http://forums.mrplc.com/index.php?download=595 You are looking for 1761-CBL-PM02.(if you say you have a 8miniDin port) Not sure though about port 2 with miniDin Last time I checked a ML1500-LSP had 1 port miniDin - Channel 0 and ML1500-LRP had 1port miniDin-Channel 0 2port DB9-Channel 1 Goo...
by jamrobe
Mon Jun 23, 2008 9:40 am
Forum: SIMATIC HMI
Topic: Request: old ProSave V5 or V4
Replies: 0
Views: 2040

Request: old ProSave V5 or V4

Hi, I encountered some Siemens OP170B panels which give me an error at upload as Prosave version and system operating version are not compatible. Unfortunately I did not look an panel at start up loader version. Anyway I have Prosave V6.0 (built V6.0.2.16) On siemens site I found V7.4.1 and V7.3.2 A...
by jamrobe
Thu Jun 05, 2008 5:31 am
Forum: Drivers and Inverters
Topic: [ReLink] : DriveWorksEZ for V1000 and G7 Yaskawa drive
Replies: 9
Views: 15337

Nope, not a thing.

Still waiting.

And that because I didn't go to a free course... :(
by jamrobe
Thu May 08, 2008 5:45 pm
Forum: Other (only about CAD and Soft)
Topic: [?+]: Serial Port Mapper
Replies: 2
Views: 3866

Thanks,

Problem solved.
With advice from sania I changed the actual com port on USB device.

I will keep this program anyway as a nice to have utility.

Regards
Jam
by jamrobe
Thu May 08, 2008 9:52 am
Forum: SIMATIC HMI
Topic: [?]: OP17, upload COM problem, have only USB-serial adapter.
Replies: 3
Views: 3534

Problem solved

Thanks for help.

sania : good advice :), the only problem on the beginning I couldn't find port settings for my USB adapter, but after reinstalling the driver from original cd all went ok.

saugarm: thanks for utility, good to have it.

Regards
Jam
by jamrobe
Wed May 07, 2008 7:56 am
Forum: SIMATIC HMI
Topic: [?]: OP17, upload COM problem, have only USB-serial adapter.
Replies: 3
Views: 3534

[?]: OP17, upload COM problem, have only USB-serial adapter.

Hi everybody. Need to upload a OP17 siemens panel. Tried with ProSave but it would not accept Com5, only Com1 or Com2. ProTool accepts other coms, but when I want to back-up it starts ProSave etcetc. I will try to get a Serial Port Mapper to map Com5 over Com1, however, any other suggestions? Thanks...
by jamrobe
Wed May 07, 2008 7:46 am
Forum: Other (only about CAD and Soft)
Topic: [?+]: Serial Port Mapper
Replies: 2
Views: 3866

[?+]: Serial Port Mapper

Hi, can anyone share a working version for Serial Port Mapper ( from Fabulatech) ? Or as matters any program who allows me to map for example Serial port Com5 to Com1. Need to upload from a Siemens OP17 the compiled file, but ProSave would accept only Com1, and Com2 I have only USB ports therefore u...
by jamrobe
Wed May 07, 2008 7:26 am
Forum: Other PLC
Topic: [Link]: software Gp-proEX v2.0 full+ serial
Replies: 26
Views: 18708

Thanks cuervo2k,

Works just fine.

for gremlin:
I used hj-join (Join32.exe) to link the files and 7-zip to extract the archive to ISO, WinImage to mount.

Cheers all and keep up the good work.
Jam
by jamrobe
Thu Mar 27, 2008 7:39 pm
Forum: Other HMI
Topic: Request: C-More programming software keycode
Replies: 15
Views: 31851

Request: C-More programming software keycode

Hi all. Does anyone can provide keycode to install C-More programming software EA-PGMSW for Automation Direct HMI?? http://c-more.automationdirect.com/software/software_demo.html Best regards Jam C-more Demo Software The demo software has all the features of the purchased version, except that you ca...
by jamrobe
Sun Mar 23, 2008 4:33 pm
Forum: Drivers and Inverters
Topic: [ReLink] : DriveWorksEZ for V1000 and G7 Yaskawa drive
Replies: 9
Views: 15337

Thanks most, I already downloaded these. DriveWizardPlus is a configuration software for V1000 and G7, and you can change parameters and monitor stuff inside. DriveWorksEZ is accessing the programming side in FBD inside the drive. If you have DWPlus you will see under Tools tab a link for DWEZ. DWEZ...
by jamrobe
Tue Mar 18, 2008 7:38 am
Forum: OMRON PLC & HMI
Topic: [?]: Function Block Protection
Replies: 2
Views: 4712

[?]: Function Block Protection

Hi,

Is there any way to unprotect Function Blocks done with CX-Programmer?

Regards
Jam
by jamrobe
Sat Mar 15, 2008 4:51 am
Forum: Drivers and Inverters
Topic: [ReLink] : DriveWorksEZ for V1000 and G7 Yaskawa drive
Replies: 9
Views: 15337

[ReLink] : DriveWorksEZ for V1000 and G7 Yaskawa drive

Hi all,

Anyone came across this one?

One year ago Yaskawa rep told us it's free, just we have to come to training class, free as well. We did not have time, and now I am not with same co.

Regards all
Jam
by jamrobe
Tue Mar 11, 2008 5:58 pm
Forum: Other PLC
Topic: [?]: SLS-500-Configurator Hiquel
Replies: 0
Views: 2217

[?]: SLS-500-Configurator Hiquel

Hi all,

Does anyone heard about SLS-500-Configurator for a PLC made by a company called Hiquel?

Any chance for it?

Regards
Jam
by jamrobe
Sat Mar 08, 2008 6:49 am
Forum: SIMATIC system
Topic: [Link]: MicroWin V4.0 + Simulator( full)
Replies: 4
Views: 10351

ok got it

Found the other posts, and followed FLopez advice on registry.

Many thanks Lopez

All the best
Jam
by jamrobe
Fri Mar 07, 2008 5:04 am
Forum: SIMATIC system
Topic: [Link]: MicroWin V4.0 + Simulator( full)
Replies: 4
Views: 10351

Hi,

Did anyone open the V4+sim file?

I downloaded all 53 parts + crc, tried to unrar but got CRC error.

Can anyone download this on rapidshare or megaupload but pls bigger breakup?

Cheers
Jam
by jamrobe
Wed Feb 20, 2008 11:27 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [LINK]: RSTrainer 2000 for RSLogix 500 Offline
Replies: 2
Views: 5008

Please check this.

I did not use it for a long time, if it is the correct one and still working reply as to look for the key

Link_is_Dead :(/93546481/rs ... 1.Link_is_Dead :(
Link_is_Dead :(/93539936/rs ... 2.Link_is_Dead :(

Cheers
by jamrobe
Wed Feb 20, 2008 11:03 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Request: Allen Bradley RsLinx Classic Pro v2.52.00.CPR9
Replies: 14
Views: 24507

I got same, however installed RSLinx after that and running beatifully
(unless you disregard the mess he made with the firewall)

So I see no problem with the errors.

Try it and thanks again Oscar for the share.

Cheers
Jam
by jamrobe
Tue Feb 19, 2008 11:29 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [LINK] : Activation RSNetWorx MD
Replies: 11
Views: 14448

There is not a standalone RSNetworx MD. What we were talking here is about a part of RSNetworx for Dnet called MD. If you have the RSNetworxDnet and you will apply the above key you will get the MD part, a good tool for diagnose DNet networks. Now if you like RSNetworx for Dnet see here http://plc.n...
by jamrobe
Tue Feb 19, 2008 3:08 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: [LINK] : Activation RSNetWorx MD
Replies: 11
Views: 14448

YEP

It is working like a charm.

Thanks a lot
by jamrobe
Mon Feb 18, 2008 4:41 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: [LINK] : Activation RSNetWorx MD
Replies: 11
Views: 14448

OK

Here we have one piece temporary activation for MD

Link_is_Dead :(/92782287/rs ... p.dfi.html

Maybe we have one smart guy to transform this into a parmanent one.

Cheers
Jam
by jamrobe
Wed Jan 30, 2008 11:51 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [LINK]: RSTune
Replies: 11
Views: 14800

Thanks all

Downloaded, installed, works just fine....

Remains just to learn it... :shock:

Cheers
Jam
by jamrobe
Sun Jan 27, 2008 11:14 pm
Forum: Other PLC
Topic: [LINK]: Case FBD from Sauter
Replies: 16
Views: 19454

Thousands thanks artbistr

However, I have encountered a minor problem :)

Your files contains a upgrade licence for the software.
As I do not have a original licence, normally, I am informed that "Licence not found" when I try to upgrade.

Any solution as how to get around this problem?

Regards
Jamrobe
by jamrobe
Sat Dec 29, 2007 4:16 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: [LINK]: RSTune
Replies: 11
Views: 14800

Hi,

Can you please upload again, as older links are not working anymore.

Many thanks,
Jam
by jamrobe
Sun Dec 09, 2007 1:02 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: [LINK] : Activation RSNetWorx MD
Replies: 11
Views: 14448

Hi,

So nobody can share a RSNetworxMD for Dnet activation??

Sawadee, did you get anything?
by jamrobe
Sun Dec 09, 2007 1:00 am
Forum: Other PLC
Topic: [LINK]: Case FBD from Sauter
Replies: 16
Views: 19454

[LINK]: Case FBD from Sauter

Hi everybody

Does anyone have Case FBD from Sauter? or/and any soft from this link
http://www.sauter-controls.com/sauter/e ... _eng_.html

Thanks for any hint.

Cheers
Jamrobe