Search found 51 matches

by alansal
Thu Oct 28, 2021 4:59 pm
Forum: SIMATIC system
Topic: [?]: configure Scalance Multiple Ring Redundancy
Replies: 1
Views: 991

[?]: configure Scalance Multiple Ring Redundancy

Dear All, I need to configure my scalances to form multiple redundant rings via ethernet ports but i am not sure how to do it. (If it were one ring i could use one master and rest of them clients but in multiple ring i got lost. Need to use sub-masters and domains...) Open to any english documents /...
by alansal
Thu Nov 19, 2020 1:58 pm
Forum: Other PLC
Topic: Ecostruxure Control expert (Unity Pro V14)
Replies: 21
Views: 47345

Re: Ecostruxure Control expert (Unity Pro V14)

fantastic but where is the download link gentlemen?

can not locate in forum, only one i found,it redirects to a "box" asking for membership?!
by alansal
Thu Nov 24, 2016 6:27 pm
Forum: SIMATIC system
Topic: Modbus RTU Communication via S7-317 2PN/DP
Replies: 1
Views: 2606

Modbus RTU Communication via S7-317 2PN/DP

Hello All, As the topic says i need to communicate with another 3rd party via Modbus RTU. However i only have cpu (317-2EK14-0AB0 v3.2), no other CP343-1 etc. Is it still possible to read values? If so, can it be done via standard blocks or do i need special software as well? Thanks in advance.....
by alansal
Mon Nov 07, 2016 8:52 pm
Forum: Other HMI
Topic: Unity Pro XL V11.0
Replies: 12
Views: 57404

Re: Unity Pro XL V11.0

Hello Forum, ....... If anyone can help me with the serial or crack, it would be great help. . I am not aware of the PLC's in Schneider & I dont know whether the Unity Pro XL 11.0 will communicate with M340. If there any basic manuals in establishing Communication with PLC from Laptop, please share...
by alansal
Thu May 26, 2016 3:12 pm
Forum: SIMATIC system
Topic: Two Modbus Integers to Real in S7-300?
Replies: 5
Views: 6185

Re:

Schtiel wrote:You don't need to merge anything, just access two words as floating point:
Image
thank you.... this will surely work... will try asap....
by alansal
Mon May 23, 2016 3:12 pm
Forum: SIMATIC system
Topic: Two Modbus Integers to Real in S7-300?
Replies: 5
Views: 6185

Re: Two Modbus Integers to Real in S7-300?

dehell wrote:Hello,
Which sofware? TIA? Step7?

http://hpics.li/8e364e8
Step 7 it is... V5.5 SP3

Merging two integers and forming a floating number is my problem....

Thanks for your kind interest...
by alansal
Mon May 23, 2016 9:10 am
Forum: SIMATIC system
Topic: Two Modbus Integers to Real in S7-300?
Replies: 5
Views: 6185

Two Modbus Integers to Real in S7-300?

Hello everyone, The question is simple but for me the answer is a little cloudy. 1) I have two registers i can read from a flowmeter to form a floating value. One is R2610 and other is R2611.I need to place them such that they need to form a floating value however siemens keeps converting (only the ...
by alansal
Thu Mar 10, 2016 9:40 am
Forum: SIMATIC system
Topic: S7-Charts for Step-7 ver5.5+sp3?
Replies: 3
Views: 3802

Re: S7-Charts for Step-7 ver5.5+sp3?

I found the required add-on... If someone needs please post here or pm me... I will try to upload and share if needed...


Thanks....
by alansal
Thu Mar 10, 2016 6:26 am
Forum: SIMATIC system
Topic: S7-Charts for Step-7 ver5.5+sp3?
Replies: 3
Views: 3802

S7-Charts for Step-7 ver5.5+sp3?

Hello All, As the topic says i do need the installer for S7-Charts for my project seems to be missing that specific software package. (I do have Step-7 V5.5+SP3 installed) I tried downloading via installing the required software packages but it seems to be missing somehow. Can someone direct me on t...
by alansal
Tue Nov 24, 2015 9:45 am
Forum: SIMATIC system
Topic: S7-1500 CPU Communication in S7 V5.5 Project
Replies: 2
Views: 2802

Re: S7-1500 CPU Communication in S7 V5.5 Project

krank wrote:You have to use CM 1542-5
thanks.. i will give it a try...
by alansal
Mon Nov 16, 2015 5:37 am
Forum: SIMATIC system
Topic: S7-1500 CPU Communication in S7 V5.5 Project
Replies: 2
Views: 2802

S7-1500 CPU Communication in S7 V5.5 Project

Hello all, Assume that i have my backup for a S7-300 series cpu in S7 V5.5 and on the other side there is a S7-1500 CPU. Is it still possible to communicate my cpu with the new plc without migrating my V5.5? If so in Netpro how can i show it? (Just simple as inserting an other station and trying to ...
by alansal
Tue Jul 14, 2015 2:16 pm
Forum: SIMATIC system
Topic: S7-315 2PN/DP with CP343-1 Lean as Modbus TCP/IP Master?!
Replies: 2
Views: 2595

Re: S7-315 2PN/DP with CP343-1 Lean as Modbus TCP/IP Master?

Can at least someone help for Modbus Master?!

Besides is there anyone that can tell me how many modbus communications can a 315-2PN/DP have?


Thanks in advance....
by alansal
Thu Jul 09, 2015 2:08 pm
Forum: SIMATIC system
Topic: S7-315 2PN/DP with CP343-1 Lean as Modbus TCP/IP Master?!
Replies: 2
Views: 2595

S7-315 2PN/DP with CP343-1 Lean as Modbus TCP/IP Master?!

Hello everyone,

I need to read a couple of holding registers (from 700 to 750) and write some (800 to 850) using MB over TCP/IP. This also has to be done as a master.


As always many many thanks in advance...

Kind Regards,

(tyou)
by alansal
Thu Apr 30, 2015 4:30 pm
Forum: Other PLC
Topic: Unprotect Modicon Concept 2.6 Backup DFB's?
Replies: 0
Views: 1389

Unprotect Modicon Concept 2.6 Backup DFB's?

Hello all,

In a project i need to update the existing blocks but all DFB's seem to be "protected" when i try to edit them with "Cceptdfb"

can you please provide a way to override this so called "protection"?


With Regards,

(tyou)
by alansal
Sun Apr 12, 2015 7:12 am
Forum: Utilites for Simatic PLC
Topic: Tool for Connecting to Siemens S7-300 from iOS?
Replies: 5
Views: 12660

Tool for Connecting to Siemens S7-300 from iOS?

Hello all,

I am currently tring to achieve something so in this regard do you know a software that can connect to S7-300 via iOS?
Or should i better try to connect to SCADA instead?(Wonderware Intouch)

Does anyone have these kind of softwares that can help?


Many many thanks....

(tyou)
by alansal
Sat Apr 11, 2015 10:20 pm
Forum: Other HMI
Topic: Intouch export trends in csv?
Replies: 5
Views: 10158

Re: Intouch export trends in csv?

There is a button in scada that does it; It is as follows, hope it helps; (Where HistTrendvga is page name) IF HTGetPenName("HistTrendvga",HistTrendvga.UpdateCount, 1) <>"" OR HTGetPenName("HistTrendvga",HistTrendvga.UpdateCount, 2) <>"" OR HTGetPenName("HistTrendvga",HistTrendvga.UpdateCount, 3) <>...
by alansal
Sun Mar 22, 2015 10:38 am
Forum: Other PLC
Topic: Schneider Concept Backup Files
Replies: 3
Views: 2290

Re: Schneider Concept Backup Files

Hi, You can check in the .asc file in your project folder. It will be in the first line. BR FAS Hello Leofarhan, First of all thx for the reply however there are no asc extensioned files in my project folder. I opened the .C0 file in the folder and saw that it is Concept 2.2 SR2 dbv2.150 Can you by...
by alansal
Thu Mar 19, 2015 7:21 pm
Forum: Other PLC
Topic: Schneider Concept Backup Files
Replies: 3
Views: 2290

Schneider Concept Backup Files

Hello All,

My simple question is i do have a schneider concept backup of a project however i do not know which version is used to create it,

IS THERE A SIMPLE METHOD TO FIND WHICH VERSION WAS USED TO BUILD IT?
It may be any from 1_01 to 2_6 SR6...

Thanks in advance....
by alansal
Wed Nov 05, 2014 6:42 pm
Forum: Other PLC
Topic: LINK: User Documentation of Advant OCS with Master software
Replies: 35
Views: 40963

Re: LINK: User Documentation of Advant OCS with Master softw

I need this software to control ABB PM633 PLC....

Can someone please share it?
by alansal
Sat Sep 20, 2014 8:30 pm
Forum: PLC's video
Topic: Simulink for Matlab Installer File
Replies: 1
Views: 7898

Re: Simulink for Matlab Installer File

Problem solved.... In case any1 needs i can send the torrent file....

(del)

(tyou)
by alansal
Tue Sep 16, 2014 1:44 pm
Forum: PLC's video
Topic: Simulink for Matlab Installer File
Replies: 1
Views: 7898

Simulink for Matlab Installer File

First of all for forum admins i really could not find this and i placed it here, if i am mistaken please move my topic to suitable location. Sorry for any inconvenience.... Hi all, As topic says i need the Simulink add on for my Matlab 2013a (or i can find the latest 2014 from torrent). Can anyone s...
by alansal
Fri Aug 15, 2014 8:32 am
Forum: Utilites For simatic HMI
Topic: Kepware OPC Server for Siemens
Replies: 0
Views: 8352

Kepware OPC Server for Siemens

Hi all, As the topic says i am looking for Kepware that can run in Win7 32/64 bits and need some license for communicating(better a keygen if possible) with S7-300 over TCP/IP. (Also Wonderware Intouch communication as well) I found one installer in forum however keygen was unable to produce keys fo...
by alansal
Mon Aug 11, 2014 9:32 am
Forum: Other HMI
Topic: Request:ArchestrA System Platform 2012 license
Replies: 4
Views: 5120

Re: Request:ArchestrA System Platform 2012 license

After the installation is complete i,unfortunately, have too look for a license key to activate...

Does any1 have such a license? (sbutton)



Many thanks.... (tyou)
by alansal
Fri Aug 08, 2014 8:10 pm
Forum: Other HMI
Topic: Request:ArchestrA System Platform 2012 license
Replies: 4
Views: 5120

Re: Request:ArchestrA System Platform 2012 license

Hi..

Do you have the installer image?


Can you post a link or sth?

Thanks
by alansal
Wed May 21, 2014 2:22 pm
Forum: SIMATIC system
Topic: ComDrvS7 Programme for S7-300/1200/1500 series
Replies: 3
Views: 4517

Re: Fast Datalogger Programme for S7-3XX series

Thank you Shkodran.... I will try it asap...


=)
by alansal
Thu May 15, 2014 8:47 am
Forum: SIMATIC system
Topic: ComDrvS7 Programme for S7-300/1200/1500 series
Replies: 3
Views: 4517

ComDrvS7 Programme for S7-300/1200/1500 series

Hello all,

I do have a multiproject and i need to save same values from different CPU's DB's to an excel file with a sample speed of 100ms tops.
Can you send me a link or show me the way to do it?


With Kind Regards,
by alansal
Sat Oct 12, 2013 2:54 pm
Forum: SIMATIC system
Topic: Communication between 2cpu's!... One with cp343-1 lean...
Replies: 1
Views: 1980

Communication between 2cpu's!... One with cp343-1 lean...

Hello Everyone.... My question is i have 2 cpu's... cpu-1 : 317-2EK13-0AB0 (ver2.6) with a cp343-1 (343-1EX30-0XE0 ver2.0) (also in comm with 16 other cpus and staff...) cpu-2 : 317-2AJ10-0AB0 (ver2.1) (also in comm with 12 other cpu's via another cp343-1 and staff) These two have definitely differe...
by alansal
Tue Jun 04, 2013 5:17 pm
Forum: Other PLC
Topic: [?]: Upload logics from Schneider 140-CPU-651-50
Replies: 0
Views: 1470

[?]: Upload logics from Schneider 140-CPU-651-50

Hi all, As the topic says, i have a modicon CPU Schneider 140-CPU-651-50 installed with (NO UPLOAD INFO) selected. I can connect to PLC but upload from PLC can not be selected. I can stop CPU no problem... But don't know how to transfer logics from it. (I can not risk to lose and data on CPU) Please...
by alansal
Tue Apr 02, 2013 3:36 pm
Forum: SIMATIC system
Topic: [?]: Replace a 315-2PN/DP CPU
Replies: 5
Views: 3930

[?]: Replace a 315-2PN/DP CPU

Hi All, In a plant i will have to switch two PLC's to try something but i don't know how. The CPU's are identical, 6ES7-315-2EH14-0AB0 V3.1 but of course logics and configs are different. and this is a multi project (consisting of 10+ CPU's total) one of them is used as GW (to collect and send data ...
by alansal
Sun Mar 10, 2013 3:07 pm
Forum: SIMATIC system
Topic: 315 2PN/DP modbus tcp communication....
Replies: 0
Views: 1813

315 2PN/DP modbus tcp communication....

Hi all, The problem is; A 315 2PN/DP cpu is being used as a gateway (GW) to collect data from other cpu via profibus and sending via TCP, but somehow the slave seems not to be reading any data from my cpu. No configuration/logic changes were made but all of a sudden 2 weeks before this problem is oc...
by alansal
Sun Jul 29, 2012 6:46 pm
Forum: SIMATIC system
Topic: [?]: PCS 7 V8.0 License Problem
Replies: 2
Views: 4581

[?]: PCS 7 V8.0 License Problem

Hi all, I installed PCS7 V8.0 (With no problem) on a windows 7 based pc. I downloaded EKB (both 2012_03_08 and 2012_07_19 versions) and installed the required keys, however when i try to open pcs7 it tells me "no valid license keys are found!" then i opened license manager and checked for licensed p...
by alansal
Fri Nov 18, 2011 1:21 am
Forum: SIMATIC system
Topic: [?]: Can not download a FB due to trigger??
Replies: 0
Views: 1084

[?]: Can not download a FB due to trigger??

Please help..
How can i re-download the FB17 (which is my main communication block for other plc's as well....


Image


Thanks in advance....

(sos)
by alansal
Mon Nov 14, 2011 3:01 am
Forum: SIMATIC system
Topic: [?]: Stat and temp error....
Replies: 0
Views: 1196

[?]: Stat and temp error....

Dear all, This is not an error but sort of warning... I will write down the sequence,please examine and tell me what is wrong; 1) i check the logics online,no difference, 2) i edit one FB and add a "STAT" item. (Such as calling another FB or a Temp), 3) i save and it tells me "If i download directly...
by alansal
Mon Nov 14, 2011 2:48 am
Forum: SIMATIC system
Topic: [?]: The statements are not being processed?!?!!...
Replies: 3
Views: 3100

Re: [?]: The statements are not being processed?!?!!...

yes... it seems to be working....

=)

kind regards....
by alansal
Tue Nov 08, 2011 6:11 pm
Forum: SIMATIC system
Topic: [?]: The statements are not being processed?!?!!...
Replies: 3
Views: 3100

Re: [?]: The statements are not being processed?!?!!...

thanks sania.... i just made an instance data block for my fb.... now i need to place it in my ob1 so i think it will be just fine..... i just added an empty box in a new network in OB1,i named it as "fb15" so i think it will work... do you think so?..... For other followers of the topic i will writ...
by alansal
Tue Nov 08, 2011 4:26 pm
Forum: SIMATIC system
Topic: [?]: The statements are not being processed?!?!!...
Replies: 3
Views: 3100

[?]: The statements are not being processed?!?!!...

I created a FB (FB15) to prepare some logics and loaded to plc... But when i try to open it in online mode it says "The statements are not being processed"... I checked internet and found that Generally that message appears when the function is not being called from a higher block. You could check t...
by alansal
Mon Oct 03, 2011 10:32 am
Forum: Siemens Hardware & Software
Topic: Scalance??Web Based Management???Please help
Replies: 5
Views: 14782

Re: PLC Fault... Please help

The system is connected to the CPU with "IM 153-4 PN (ERTEC200) for S7-300 SMs"... Thanks for your interest but there is only problem left is the fault led on the scalance (X204-2)... Scalance is woking normally but somehow the fault led is on... i checked the internet for same faults and a reply ma...
by alansal
Sat Oct 01, 2011 7:15 pm
Forum: Siemens Hardware & Software
Topic: Scalance??Web Based Management???Please help
Replies: 5
Views: 14782

Scalance??Web Based Management???Please help

A scalance X204-2 is connected to system... The scalance seems to be working normally but the fault led is on... I checked the internet for same problems and found this; Need to find out the reason for fault (lit red "F" LED) on scalance X204-2. The communication is working fine for all the ports (f...
by alansal
Wed Sep 07, 2011 6:00 pm
Forum: Utilites for Simatic PLC
Topic: [?]: iPLC RW - iPod,iPhone,iPad variables table
Replies: 3
Views: 12210

Re: [?]: iPLC RW - iPod,iPhone,iPad variables table

anyone interested in sharing this file?
by alansal
Wed Sep 07, 2011 11:58 am
Forum: Utilites for Simatic PLC
Topic: [LINK]: record PLC trend value
Replies: 9
Views: 31137

Re: [LINK]: record PLC trend value

link is broken... i downloaded it a couple of times but.....(archieve file is bad). Can you please refresh it?
by alansal
Sun Sep 04, 2011 9:37 am
Forum: SIMATIC system
Topic: [?]: Step-7 V5.5 and error "package missing"?
Replies: 4
Views: 8361

Re: [?]: Step-7 V5.5 and error "package missing"?

The pc is a vmware common clone pc with XP+Service Pack 3 with 512mb ram and so and so...

Image

Uploaded with spamm.us
by alansal
Sun Sep 04, 2011 8:17 am
Forum: SIMATIC system
Topic: [?]: Step-7 V5.5 and error "package missing"?
Replies: 4
Views: 8361

[?]: Step-7 V5.5 and error "package missing"?

Hi all, i just installed Step-7 V5.5 and tried to open some projects done in V5.4 sp4 and V5.3 spXX(don't know exactly) and when i try to extract and open these projects missing software package icon appears... In this regard is it possible for me to try to install the previous sp's (sp4 for V5.4) o...
by alansal
Tue Aug 23, 2011 6:29 pm
Forum: SIMATIC system
Topic: [?+]: Help in SCL Commands (if possible,some samples)
Replies: 1
Views: 1944

Re: [?]: Help in SCL Commands (if possible,some samples)

solved the problem via "for" comment....


thanks for interest....
by alansal
Mon Aug 22, 2011 9:21 pm
Forum: SIMATIC system
Topic: [?+]: Help in SCL Commands (if possible,some samples)
Replies: 1
Views: 1944

[?+]: Help in SCL Commands (if possible,some samples)

Hi All, I need some advices and data in SCL,please help. The problem is i need to use GOTO, i will paste some of the program but the goto does not start... =( plus i am afraid to have a infinite loop (need advices accordingly) and stop the plc because currently the cpu is in run mode in a electrical...
by alansal
Tue Dec 18, 2007 12:13 pm
Forum: About forum , files exchangers and RULES
Topic: Downloading via rapidshare......
Replies: 2
Views: 6267

Downloading via rapidshare......

There are unlimited number of excellent programme shares on this site... Thanks to everyone for their kind behavior and mentality... On the other hand,i have to use rapidshare to download more than %90 of the programmes.. And unfortunately i do not own a premium membership or sth like that.... All i...
by alansal
Fri Oct 26, 2007 1:01 pm
Forum: Other HMI
Topic: Request: Crack for CIMPLICITY HMI 6.1
Replies: 0
Views: 2509

Request: Crack for CIMPLICITY HMI 6.1

i need a key-gen for CIMPLICITY HMI 6.1 version....

please lmk if you own any..... i am in desperate position.....

regards.....

:(
by alansal
Thu Oct 25, 2007 2:37 pm
Forum: Other HMI
Topic: [?]: passworded files from ftp://ftp.indusoft.ru/
Replies: 3
Views: 6624

Re: [?]: passworded files from ftp://ftp.indusoft.ru/

do you own a serial/key-gen for Cimplicity HMI ver 6.1????
please lmk asap...
regards
by alansal
Thu Oct 25, 2007 2:33 pm
Forum: Other HMI
Topic: [Request]: Crack for CIMPLICITY HMI
Replies: 29
Views: 44001

my base serial code is : 9374149974
system key code is : DA43 4807 B4DC 5084 79

hiaaannnggghh.... all i need is a key-gen.... somehow...


:(
by alansal
Thu Oct 25, 2007 2:08 pm
Forum: Other HMI
Topic: [Request]: Crack for CIMPLICITY HMI
Replies: 29
Views: 44001

[Request]: Crack for CIMPLICITY HMI

I do need the key-gen (if any.. please god let it be...) of GE-Fanuc CIMPLICITY HMI 6.1 for Unlimited I/O runtime.... please help me if you can.... i really am in almost desperate condition for i can not transfer the licences i do have from a server to another via network and/or floppy diskette........