Search found 39 matches

by mogz
Wed Dec 09, 2020 5:23 pm
Forum: Other (only about CAD and Soft)
Topic: Elcad 2021
Replies: 1
Views: 2178

Elcad 2021

Elcad 2021 just release - anyone help with "medicine"??
by mogz
Sun Aug 02, 2020 4:59 pm
Forum: SIMATIC system
Topic: Op3 project
Replies: 8
Views: 2082

Re: Op3 project

https://support.industry.siemens.com/cs ... 0&lc=en-WW

Not sure if this will help?

Also what is wrong with the old HMI - can you powerit up and thenretrieve tthe program from it?
by mogz
Sun Aug 02, 2020 7:07 am
Forum: SIMATIC system
Topic: Op3 project
Replies: 8
Views: 2082

Re: Op3 project

Without the original project it will be difficult. You must find the variables in the PLC that you wish to display on screen. This could be BIT, BYTE, WORD, DWORD in the Marker or Data block area. The same applies if you want to change setpoints etc. In protool you build the screens and incorporate ...
by mogz
Sat Jul 25, 2020 6:46 pm
Forum: SIMATIC system
Topic: Op3 project
Replies: 8
Views: 2082

Re: Op3 project

Please check section 14 "Commisioning" in the manual.
This shows you require Protool to load the config.
Have you the original Protool project?
by mogz
Sun Jul 19, 2020 8:26 am
Forum: SIMATIC system
Topic: Op3 project
Replies: 8
Views: 2082

Re: Op3 project

Look here for the manual
https://support.industry.siemens.com/cs ... nload=true

it will show how to set comms and load configuration
by mogz
Mon Jun 17, 2019 6:40 pm
Forum: Drivers and Inverters
Topic: indramat Drive Top 4v05
Replies: 0
Views: 3815

indramat Drive Top 4v05

Can anybody help? - I am looking for the software for a Indramat DKC01.1-040-7-FW servo drive
Thanks
by mogz
Wed Apr 04, 2018 4:09 pm
Forum: Other (only about CAD and Soft)
Topic: Aucotec Elcad Aucoplan v7.11
Replies: 85
Views: 139453

Re: Aucotec Elcad Aucoplan v7.11

is there any help for Elcad v 7.13 / Elcad 2018 ?
by mogz
Sat Apr 22, 2017 5:38 am
Forum: SIMATIC HMI
Topic: MOISTURE METER CONFIGURATION
Replies: 1
Views: 2290

Re: MOISTURE METER CONFIGURATION

http://www.ndc.com/en/Industries/Food-Processing.aspx
by mogz
Sat Jan 30, 2016 9:27 am
Forum: SIMATIC HMI
Topic: Wincc V7 Trend axis change
Replies: 0
Views: 2072

Wincc V7 Trend axis change

Can someone show me how to change the "Value Axis" automatically dependent on which Trend is selected.
I would like to have only on Value axis that changes automatically when a different or new trend is selected.
by mogz
Fri Dec 26, 2014 5:40 pm
Forum: SIMATIC system
Topic: Request: COM 95F STEP 5
Replies: 6
Views: 6139

Re: Request: COM 95F STEP 5

Is this software still availbale (COM 95F) ??
by mogz
Sun May 11, 2014 10:27 am
Forum: Other (only about CAD and Soft)
Topic: Aucotec Elcad Aucoplan v7.11
Replies: 85
Views: 139453

Re: Aucotec Elcad Aucoplan v7.8.0

Can anyone help with Version 7.9 SP1 ??
by mogz
Sun Sep 02, 2012 6:36 pm
Forum: samples
Topic: Request: S7 1200 Modbus To HMI Example
Replies: 1
Views: 11637

Request: S7 1200 Modbus To HMI Example

Has anyone an example of S7 1200 to HMI via Modbus communications?
by mogz
Tue Dec 13, 2011 5:59 pm
Forum: Other (only about CAD and Soft)
Topic: [?]: PcSchematic or Autocad Electrical?
Replies: 6
Views: 8286

Re: PcSchematic or Autocad Electrical?

Look at Aucotec Elcad.

Very easy to use.
You can design your own symbols.
Cross referencing etc etc etc.
Different licences for number of pages etc.
by mogz
Fri Jul 08, 2011 7:00 pm
Forum: SIMATIC system
Topic: [?]: MPI COMMUNICATION between cpu 413 & cpu 315
Replies: 9
Views: 6723

[?]: PLCSIM with 2 S7 300 CPU's exchange Global data via MPI

Is it possible to use PLCSIM to a test project where 2 S7 300 CPU's exchange Global data via MPI connection?
I am using S7 ver 5.5 with PLCSIM V5.4 sp4
I have tried and cannot get it to work?
by mogz
Sun Jan 30, 2011 7:19 pm
Forum: Other PLC
Topic: Request: Moeller/Eaton Easy Soft Safety
Replies: 1
Views: 2901

Request: Moeller/Eaton Easy Soft Safety

Can anyone share Moeller / Eaton easySoft-Safety software?

Thanks
by mogz
Sun Nov 14, 2010 11:28 am
Forum: SIMATIC system
Topic: [?]: OBs in S7-300 program
Replies: 2
Views: 3270

Re: OBs in S7300 PROGRAM

Depends what you want / need to do in your program.

OB's include -

OB 10 - 17 Time of day interrupts
OB 20 - 23 Timed interrupts
OB 30 - 38 Cyclic interrupts
OB 40 -47 Hardware Interrupts
OB 80 - 87 Asynchronous Error Interrupts
OB 102 - 101 CPU Start Up
by mogz
Sat Oct 30, 2010 11:43 am
Forum: SIMATIC system
Topic: [?]: Now it is possible to use S5-100u instead of 95u?
Replies: 9
Views: 5415

Re: [?]: Now it is possible to use S5-100u instead of 95u?

Then to change your 95 to 103 would be difficult.
You would have to add extra analog modules then re-write the program for different address etc.

Accept the offer of a free 95
by mogz
Sat Oct 30, 2010 6:22 am
Forum: SIMATIC system
Topic: [?]: Now it is possible to use S5-100u instead of 95u?
Replies: 9
Views: 5415

Re: [?]: Now it is possible to use S5-100u instead of 95u?

To change the 95 to a 100 is not easy -
Unless the 95 has a very simple program in it you can only change it for a 103.
Does the 95 use the DP port?
Does the 95 use any onboard analogs or counters?
etc etc?
by mogz
Wed Jul 21, 2010 8:00 pm
Forum: SIMATIC system
Topic: Request: Siemens S7 time functions
Replies: 1
Views: 2602

Request: Siemens S7 time functions

Can anyone share Siemens Tools Collection of Functional Examples for Date and Time ; "31696259_Datum-Uhrzeitfunktionen.zip”
http://support.automation.siemens.com/W ... n/31696259
Image :(
Many thanks.
by mogz
Wed Apr 07, 2010 3:16 pm
Forum: Other PLC
Topic: [LINK]: PILZ PNOZmulti Configurator authorization
Replies: 47
Views: 108399

Request: PILZ PNOZmulti Configurator authorization

Can anyone help with a key or crack for PNOZmulti ver 7.0.0
this is the latest version of the configurator.
by mogz
Mon Jan 04, 2010 9:14 am
Forum: SIMATIC system
Topic: [?]: How to read VFD data via USS Protocols for S7-200 ?
Replies: 0
Views: 1568

[?]: How to read VFD data via USS Protocols for S7-200 ?

Can any help me with a sample program to read VFD data (Hz, A, V) via USS Protocols for S7-200
Many thanks
by mogz
Sat Nov 28, 2009 2:22 pm
Forum: SIMATIC HMI
Topic: [?]: how to create a "dynamic" password for Siemens HMI?
Replies: 0
Views: 2021

[?]: how to create a "dynamic" password for Siemens HMI?

Does anyone know how to create a "dynamic" password for Siemens HMI?
for example,
current time into a tag.
user enters time into another tag
If both tags are the same then password = ok and user is logged on?

Thanks
by mogz
Sun Aug 09, 2009 12:36 pm
Forum: Other (only about CAD and Soft)
Topic: [LINK]: Aucotec_Elcad_Aucoplan_v7.4_MULTiLANGUAGE
Replies: 7
Views: 28936

Elcad 7.5

Can anybody help with Elcad 7.5 and/or Elcad scripting?
by mogz
Sat May 30, 2009 3:28 pm
Forum: Other (only about CAD and Soft)
Topic: Request: Solutions Electrical Software
Replies: 2
Views: 4092

Cable calc

can anybody help with the following?

INDUSTRIAL PRO V12 from Solutions electrical

http://www.electricalsoftware.co.uk

thanks
by mogz
Sat Mar 28, 2009 1:49 pm
Forum: Other (only about CAD and Soft)
Topic: [LINK]: Aucotec_Elcad_Aucoplan_v7.4_MULTiLANGUAGE
Replies: 7
Views: 28936

Elcad 7.5

Can anyone help with Elcad ver 7.5 with Service pack 1?
by mogz
Sat Mar 14, 2009 5:57 pm
Forum: SIMATIC system
Topic: [?]: S7 300/400 MC7 code ?
Replies: 1
Views: 2998

[?]: S7 300/400 MC7 code ?

Has anyone any information on the S7 300/400 MC7 code and its meaning?
by mogz
Sun Dec 07, 2008 1:08 pm
Forum: Other (only about CAD and Soft)
Topic: [LINK]: portable DXF- / DWG-Viewer wandet
Replies: 1
Views: 2920

Have a look at eDrawings it is free!

http://www.edrawingsviewer.com/

Autodesk Design Review free
Image
http://download.autodesk.com/esd/design ... ew2009.exe
by mogz
Thu Nov 20, 2008 6:38 pm
Forum: SIMATIC system
Topic: [?]: S5 eprom Format
Replies: 2
Views: 2717

S5 Blcok Header

All S5 blocks(PB,SB,FB,FX,DB etc) have a header that is not displayed by the Step 5 software. The header is made up of 5 words. Word 1 = Syncronization pattern (7070) Word 2 = Block Type and Block number Word 3 = PG Identifiers and first part of Library number Word 4 = Contains 2 bytes of the librar...
by mogz
Tue Aug 05, 2008 6:46 pm
Forum: Other HMI
Topic: request: OPC Web Client
Replies: 0
Views: 2036

request: OPC Web Client

Can anyone help with a crack for OPC Web Client from Software ToolBox or OPC Web studio from Resolvica?
by mogz
Sat Feb 16, 2008 8:25 am
Forum: Other (only about CAD and Soft)
Topic: [LINK]: crack for Elcad ver 7.3.2 / 7.4
Replies: 11
Views: 15166

Has anyone crack for latest version of Elcad; version 7.4?
by mogz
Sat Oct 13, 2007 6:58 pm
Forum: Other PLC
Topic: Request: OPC Link Office License
Replies: 0
Views: 2220

Request: OPC Link Office License

Can anyone help with License crack for OPC Office Link?
by mogz
Sun Sep 30, 2007 7:40 am
Forum: Other PLC
Topic: [?] Has anyone information/keygen for OPCWareXL ?
Replies: 0
Views: 1935

[?] Has anyone information/keygen for OPCWareXL ?

Has anyone information/keygen for OPCWareXL ?
by mogz
Sat Sep 08, 2007 9:41 am
Forum: SIMATIC system
Topic: [?]: convert an old S5 project written with Quadriga
Replies: 0
Views: 1835

[?]: convert an old S5 project written with Quadriga

Can anyone help me?
I need to convert an old S5 project written with Quadriga.
Has anyone a copy?
by mogz
Tue Jul 10, 2007 2:37 pm
Forum: SIMATIC system
Topic: [?]: Step 5 Keys
Replies: 4
Views: 7008

I tried this and it does not work.

If I use EKBBackup to change number of keys on original yellow authors disk then use ALM to transfer key, all works ok.
by mogz
Tue Jun 05, 2007 5:40 pm
Forum: SIMATIC system
Topic: [?]: Step 5 Keys
Replies: 4
Views: 7008

I try and install the S5/Graph 5 keys with same ID: KHE number but S5 say authorisation not found?

Can anybody help?

Thanks
by mogz
Sun May 13, 2007 8:13 am
Forum: SIMATIC system
Topic: [?]: Step 5 Keys
Replies: 4
Views: 7008

[?]: Step 5 Keys

Anyone help withkeys for Step5/graph5?
The Keys in EKB do not work?

Thanks