Search found 41 matches

by winnipeg_1
Sun Jun 08, 2014 4:14 pm
Forum: Other PLC
Topic: 800xa Library Help
Replies: 0
Views: 938

800xa Library Help

Hello,

I've installed 800xa version 5.2.0 and everything went fine without errors.

However - when I open control builder and try to start a new project it can't find any library's and shutsdown. Not sure on this?

Thanks for any help on this
by winnipeg_1
Fri Jun 06, 2014 12:28 pm
Forum: Other PLC
Topic: 800xa service connection viewer "red"
Replies: 1
Views: 1143

800xa service connection viewer "red"

Hello,

my service connection viewer is "red" and not "green". In the wizard configuration, it says that my service is started? I checked my ABB services under windows and everthing is running.

Any ideas??

Thanks
by winnipeg_1
Fri May 30, 2014 12:17 pm
Forum: Other PLC
Topic: ABB 5.0 Licence Issue - LinkinX64 Help?
Replies: 8
Views: 3330

Re: ABB 5.0 Licence Issue - LinkinX64 Help?

Hello, This is just a standalone PC. The license is now taking but I have other issues; - When I create a new project in CB, it says I don't have any librarys installed and quites? - For the OPC, when I go to enter my PC IP, it doesn't provide me with the IP address from the list. Thanks for any ins...
by winnipeg_1
Thu May 29, 2014 9:53 pm
Forum: Other PLC
Topic: ABB 5.0 Licence Issue - LinkinX64 Help?
Replies: 8
Views: 3330

Re: ABB 5.0 Licence Issue - LinkinX64 Help?

Hello,

I uninstalled the CLS and went to reinstall it. It askes what type I want?

Client or Server or Standalone.

What do I choose for this.

Thanks
by winnipeg_1
Mon May 26, 2014 5:54 pm
Forum: Other PLC
Topic: ABB 5.0 Licence Issue - LinkinX64 Help?
Replies: 8
Views: 3330

Re: ABB 5.0 Licence Issue - LinkinX64 Help?

Hello,

I now have a second error -> No Active SFA -> Error Code 0x8004AB8B; The system is running without an active SFA.


Thanks
by winnipeg_1
Mon May 26, 2014 2:48 pm
Forum: Other PLC
Topic: ABB 5.0 Licence Issue - LinkinX64 Help?
Replies: 8
Views: 3330

Re: ABB 5.0 Licence Issue - LinkinX64 Help?

Hello, Yes I did that. The License Entry is 5.0.2.45. I installed 5.0.2/2. In the Machine ID I see two -> DEMO, and 0050563DF792 which is the MAC of the network card. The error I get in the License Status Viewer is: Error Code 0x4AB09 ->Invaild License Granted:Feature found, but wrong Machine ID. Th...
by winnipeg_1
Wed May 21, 2014 12:49 am
Forum: Other PLC
Topic: ABB 5.0 Licence Issue - LinkinX64 Help?
Replies: 8
Views: 3330

Re: ABB 5.0 Licence Issue - LinkinX64 Help?

Got somewhat moving on this - but it comes up with this error in the "License Status Viewer"

0X4AB09 -> Invalid License Granted Feature Found, But wrong Machine ID

THanks for any insight
by winnipeg_1
Tue May 20, 2014 9:41 pm
Forum: Other PLC
Topic: ABB 5.0 Licence Issue - LinkinX64 Help?
Replies: 8
Views: 3330

ABB 5.0 Licence Issue - LinkinX64 Help?

LinkinX64, I installed 5.0 and went to install the licence and couple items pop up 1) Unable to Load File: Failed CIV check 2) And: The ABB License Client Provider Service has not been setup to run under a vaild account. Please refer to the installation manual that came with your product for proper ...
by winnipeg_1
Thu Jan 23, 2014 6:39 pm
Forum: Other PLC
Topic: [?]: 800xA in a HVAC application
Replies: 0
Views: 969

[?]: 800xA in a HVAC application

Hello,

We have a 800xA system that we are required to control a VAV HVAC system with.
Does ABB offer anytype of HVAC application in the way of wall sensors, VAV controllers?

Thanks
by winnipeg_1
Wed Jan 22, 2014 2:57 am
Forum: Other PLC
Topic: [?+]: E143 System 800xA - Troubleshooting Core System
Replies: 3
Views: 2346

[?+]: E143 System 800xA - Troubleshooting Core System

Hello,

Does anyone have and can post the course -> E143 System 800xA - Troubleshooting Core System.

Thanks
by winnipeg_1
Mon Jan 13, 2014 2:38 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello,

Got them

Thanks for everything - couldn't have done it without your help!
by winnipeg_1
Mon Jan 13, 2014 2:28 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello,

Have logged into 4Share - but I can't get the files?
by winnipeg_1
Sun Jan 12, 2014 3:15 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello,

Looked around - were do I find T300 and T301?

Thanks
by winnipeg_1
Sat Jan 11, 2014 10:10 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello,

That sure changed things. I now see in BC under Controllers -> Controller_1 (127.0.0.1:2) with a check mark.

Is thier someplace or something I can do to verify that it's all setup?


Thanks
by winnipeg_1
Sat Jan 11, 2014 7:20 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello again

I went to download the controller and it tells me the following;

Control Builder
It is not possible to go to online mode no Connection

In the AFW Service, I see that OPCDA_Connector is not green but a :!:

Thanks
by winnipeg_1
Sat Jan 11, 2014 5:49 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello,

I only have AC800M Classic, AC800M SB2 Libraies and Fieldbus Builder in the left side window.
by winnipeg_1
Sat Jan 11, 2014 3:25 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello, After trying couple of things - I was able to get the OPC working with the yellow smile. And I also found the post on setting up the CB for the SoftController. But I haven't figured out how to load the extensions and also when I try to download the controller with CB, it's asking for a user I...
by winnipeg_1
Sat Jan 11, 2014 2:37 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello, Couple of things which I can't locate 1) CB project for the SoftController (check in my prev. posts). I looked and can't find this post. 2) must see an yellow smile opposite the address, e.g. 127.0.0.1:2. The OPC says it's "running" - but I don't see a yellow smile and their is nothing in the...
by winnipeg_1
Wed Jan 08, 2014 1:43 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello A big thanks to Linkinx64 for helping me set this up. I finally have installed 5.0 on my XP with VMWare XP and things seem - "haven't started any projects yet" to start . I dO see err0rs in tHe 0perat0r w0rk stati0n - SG_S0ftP0int Netw0rk, In0pertive, Service in 0perati0n. - 800ENGN0DESC, N0de...
by winnipeg_1
Tue Jan 07, 2014 2:09 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

hello, When I start the wizard it asks me to select -> Aspect Server or Aspect Server and Conectivity Server. Then it stops on the next screen as it asks for "Requried Membership in Industrual IT Admin Group" Another thing which I notice - is that SQLService is running and not completely setup. Thanks
by winnipeg_1
Tue Jan 07, 2014 3:58 am
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello, I'm on the configuration screen and have ran into a problem. For the AFWConfigure Progress I get the following errors; Error - Create System requires membership in Industrial IT Admin group Error - RNRP Initialilation Failed. Error - Create System: Unspecified Error AFWConfigure Finished with...
by winnipeg_1
Mon Jan 06, 2014 1:00 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello,

Agree, hands on is the only way to learn. Had a busy weekend, so I never finished my installation but things look good so far. Hopefully I'll get it done this week.

Thanks again for your help, I'll keep you posted.
by winnipeg_1
Sat Jan 04, 2014 3:56 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

THanks - fixed the problem - installation moving forward and should have it installed today.
by winnipeg_1
Sat Jan 04, 2014 4:48 am
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello,

On the start of Run Automated Installation, I get the following error;
ShellWizard.exe - Application Error

The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
I'm running VMWare with XPpro 32 bit.

Thanks again
by winnipeg_1
Fri Jan 03, 2014 3:33 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello,

Can 5.0 run on a Windows XP Virtual Machine? If so, is their a document which will tell me the minimum hardware requirements of the machine -> ram, hardware size etc.

Thanks
by winnipeg_1
Fri Jan 03, 2014 2:45 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello, Not sure what's happening, but now Xp is doing weird things. I tried to use the search function and it tells me that files are missing. Then I tried to open couple things in windows and it tells me that I don't have the rights? Also IE doesn't work - but I re-read your post and see to make su...
by winnipeg_1
Fri Jan 03, 2014 1:00 am
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello,

KB913522 is a patch from SP2. My XP is at SP3 that incorporates this patch.

As stated above it knows that I have a newer version but the installation does not let me move forward.

Thjanks
by winnipeg_1
Fri Jan 03, 2014 12:22 am
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello, Making progress - but stops at installing Microsoft Hotpatches. It wants to install kb913522 and when I go to install it, the installation tells me -> Service Pack Version is newer then the update you are applying. No need to install this update. But I can't move forward without updateing thi...
by winnipeg_1
Thu Jan 02, 2014 8:09 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Thanks - fixed that one.

But now it asks me to select AC 800M Aspect Server. The other choices are 800xA Core system or Select Setup Package manually.

What option do I select?
by winnipeg_1
Thu Jan 02, 2014 5:48 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello, Thanks for the help on this - I'm really confused on what I want and what is doable! Basically I'm looking to install a single node on a XP that will allow me to do programming, build template etc. This would include the engineering and operator space. This would be my machine to following co...
by winnipeg_1
Wed Jan 01, 2014 11:09 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello, Ran into couple of problems which I'm sure that you'll be able to help me out with. Please let me know if what I have done so far is correct? My goal is a signal node that has eng and oper work station, with the softcontroller for learning. 1) started with System Planner 2) The next page is t...
by winnipeg_1
Wed Jan 01, 2014 4:55 am
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Linkinx64,

Is there a document to install 5.0 using one XP Machine. I ran the auto install but it askes for several options whcih I don't know what to check off.

Thanks
by winnipeg_1
Mon Dec 30, 2013 8:44 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Thanks - 800xa 5.0 SP2 and a 32 bit XP Machine. I'll let you know how it goes.
by winnipeg_1
Mon Dec 30, 2013 3:23 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

What software version do I require to run this on a XP 32 bit machine.

Thanks
by winnipeg_1
Mon Dec 30, 2013 1:29 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

I should be able to download all the nessecary software from this link - viewtopic.php?f=43&t=15855 including the bypass licence? Correct.

For what I want, can the minimum be ran on a signal XP 32bit machine.

THanks
by winnipeg_1
Sun Dec 29, 2013 11:22 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Linkinx64,

Thanks - this was the guidence I was looking for. Can you clairify what I need for the software. This part I don't have and need to get and install.

I only have XP Pro 32bit and one machine. Will this work?

Thanks again for your help on this.
by winnipeg_1
Fri Dec 27, 2013 6:55 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

Re: [?]: start learning the 800xA

Hello Linkinx64,

We have the 800xA version 5.0 SP2. The controllers are the AC 800M and S800 I/O.

We deal more with PID's then turning things on\off.

Thanks
by winnipeg_1
Fri Dec 27, 2013 4:09 pm
Forum: Other PLC
Topic: 800xA minimal configuration
Replies: 2
Views: 2234

Re: 800xA minimal configuration

Linkinx64,

This is what I would like to do for learning - using one computer.

Can you describe what is requried - software requried, Computer OS, document on doing this.

Thanks on this
by winnipeg_1
Fri Dec 27, 2013 1:41 pm
Forum: Other PLC
Topic: [?]: start learning the 800xA
Replies: 48
Views: 11744

[?]: start learning the 800xA

Hello, With being very new to the ABB stuff, I would like to start learning the 800xA. I've downloaded several of the training documents online - thanks, but would like to know if the simulator is part of the ABB 800xA software package or is this a seperate part. Also what is the difference between ...
by winnipeg_1
Tue Dec 24, 2013 1:30 pm
Forum: Other PLC
Topic: [?]: License ByPass for ABB 800xA 5.0.2/3...
Replies: 12
Views: 12314

Re: [?]: License ByPass for ABB 800xA 5.0.2/3...

Hello, I've been looking for ABB docs and the bypass license for a while until I was directed to this site - by the way it's very informitive. I went on the links and all the files are removed. Would it be possible for someone to place the files back on so I can download them. THanks and have a merr...