Search found 26 matches

by Ronny_Resistor
Sun May 21, 2017 12:49 am
Forum: Industrial network
Topic: Parker 890 Ethernet I/p 8903/IP to Controllogix
Replies: 0
Views: 1612

Parker 890 Ethernet I/p 8903/IP to Controllogix

Anyone ever connect an Ethernet Controlled 890 AC drive to a Allen bradley Controllogix processorover Ethernet I/P ?? I followed the instruction manual but I think something is wrong as I cannot get this to work, two days alrady and no results. I was going with the 690 drive but someone toldme this ...
by Ronny_Resistor
Thu Apr 13, 2017 9:46 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Copying Legit Allen Bradley Keys to another harddisk Discuss
Replies: 1
Views: 1958

Copying Legit Allen Bradley Keys to another harddisk Discuss

I have a notebook that has two instances of windows7 on it one is my old work the other is my new and legit work. I limited the size of this hard drive and had no more room for expansion (480 Gig) so I bought a new 1 Terra SSD and used Acronis this copy did not transfer the AB Serial numbers, so I t...
by Ronny_Resistor
Sun Dec 11, 2016 2:04 am
Forum: Other HMI
Topic: EZ AUTOMATION EZ SOFTHMI USB LiCENCE KEY
Replies: 0
Views: 1771

EZ AUTOMATION EZ SOFTHMI USB LiCENCE KEY

I just bought a client copy of EZ-SOFTHMI software that has an USB 8 GiG Key. Only a small portion is used. I have tried using Ubuntu DD command to image the drive. The copy of the Image works but the Licence does not transfer over. Anyone have any ideas on how to copy this Key USB drive ?? I believ...
by Ronny_Resistor
Mon Feb 08, 2016 2:52 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: how active RS5000 v24
Replies: 1
Views: 4640

Re: how active RS5000 v24

I am also looking for the activation of Studio v24 anyone able to break this yet, I have v21 sort of working. (Keep getting reminders that the software is not properly registered or activated). Would like to try running V24.
by Ronny_Resistor
Sun Feb 07, 2016 5:27 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: RSLOGIX5000 V20.01.00 (CPR9 SR 5) Activation Issues
Replies: 3
Views: 10294

Re: RSLOGIX5000 V20.01.00 (CPR9 SR 5) Activation Issues

Here it is February 2016 and the same issue has cropped up again, it looks like this is a yearly software glitch. Will let everyone know if this works later. Yep this is a yearly glitch. Delete the program and then re-install, activate as mentioned in the previous message. Remember to check "run-lik...
by Ronny_Resistor
Fri Apr 17, 2015 11:15 pm
Forum: SIMATIC system
Topic: [?]: PORTAL V13 S7-314/TP177B SIMULATION
Replies: 2
Views: 2838

Re: [?]: PORTAL V13 S7-314/TP177B SIMULATION

But can I simultae the PLC and use the actual touchscreen so I can see how it will behave or look. Manipulate registers and monitor this on the screen. actual screen not a simulated screen. I have noticed on Allen Bradley panelviews for instance the colors are way off from my development screen and ...
by Ronny_Resistor
Fri Apr 17, 2015 10:58 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [REQUEST]Softlogix 5 Anyone has it?
Replies: 6
Views: 3707

Re: [REQUEST]LOGIX5 Anyone has it?

I need Logix5 I have version 4.10 but I would like a more recent version please let me know where or when I can get this

Thank you
by Ronny_Resistor
Fri Feb 13, 2015 8:34 pm
Forum: SIMATIC system
Topic: [?]: PORTAL V13 S7-314/TP177B SIMULATION
Replies: 2
Views: 2838

[?]: PORTAL V13 S7-314/TP177B SIMULATION

I have TIA V13 installed and working... I have a small Siemens Touchscreen TP177B that I am able to program and change screens....with TIA V13 So can I simulate an S7-314 PLC on my desktop and use an actual screen to see the results or do can both the PLC and Touchscreen only run in simulation Mode ...
by Ronny_Resistor
Thu Jan 29, 2015 11:07 pm
Forum: SIMATIC system
Topic: S5 V7.23 on Windows 7 Virtual XP System
Replies: 0
Views: 1582

S5 V7.23 on Windows 7 Virtual XP System

Ok this may have been tried but I have to know. I am building a Siemens notebook and I am installing some of my older /newer software's on this I am trying to keep Siemens and Allen Bradley separate. Anyway I installed the S5 software and have it running on Windows Virtual XP the interface windows d...
by Ronny_Resistor
Tue Jan 20, 2015 1:07 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: Programming Software Panelview1400e
Replies: 0
Views: 1353

Programming Software Panelview1400e

Anyone have a copy of panelview1400 that they can send me i have the serial
by Ronny_Resistor
Tue Jan 06, 2015 1:18 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: RSLOGIX5000 V20.01.00 (CPR9 SR 5) Activation Issues
Replies: 3
Views: 10294

Re: RSLOGIX5000 V20.01.00 (CPR9 SR 5) Activation Issues

I think I have figured it out. Not sure but here it goes. I deleted V20 once more. I then deleted the *.RNL files that are found under factory talk activations. I then re-installed V20 and did the Hex edit. So far so good, V20 is up and running again, as is V19 and V18. I am trying this out on the o...
by Ronny_Resistor
Mon Jan 05, 2015 11:09 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: RSLOGIX5000 V20.01.00 (CPR9 SR 5) Activation Issues
Replies: 3
Views: 10294

RSLOGIX5000 V20.01.00 (CPR9 SR 5) Activation Issues

Installed V19 no problems, Installed V20 before Christmas no problems. Today Jan 5, 2015 I tried to run the software and had an Notice "FATAL ERROR" Anyway deleted V20 and V18 and V19 ran fine. V20 re-installed. I modded the file RS5KCP.DLL 0xFC339 3402 -> 3090 and same error came up and I cannot ru...
by Ronny_Resistor
Wed Dec 10, 2014 9:12 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Ask for activation Studio V21.03.00 and V21.0.0.0
Replies: 18
Views: 28843

Re: Studio V21.03.00 and V21.0.0.0 wanted

Please provide me with a PM (private message) as to where i can get a copy

Thankyou
by Ronny_Resistor
Fri Nov 14, 2014 3:45 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Factory talk ME 7.00
Replies: 0
Views: 2117

Factory talk ME 7.00

Anywhere I can get a clean download ??
by Ronny_Resistor
Wed Nov 12, 2014 8:30 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Factory talk ME verion 8.00
Replies: 5
Views: 6413

Factory talk ME verion 8.00

This is a technical question as I am an RSView32 user I am now forced to work with Factory talk View ME v8.0 (no free version exist on this site) I need to have three computer screens at different locations set up reading the same data. 1st the screens need to handshake who is the master including a...
by Ronny_Resistor
Tue May 20, 2014 5:12 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [?]: RSLOGIX500 V9.00.00 ACTIVATION problem
Replies: 15
Views: 40172

Re: [?]: RSLOGIX500 V9.00.00 ACTIVATION problem

OK working now. Here is what I did: Use the Serial above, then edit the Activation file and added the same Serial number in there, then I tried running the software and I got the 7 day notice..... I then Hexedit the file and changed FC339 Hex 3402 to 3090 Saved and restarted RSLOGIX 500 V9 in Window...
by Ronny_Resistor
Tue May 20, 2014 4:40 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [?]: RSLOGIX500 V9.00.00 ACTIVATION problem
Replies: 15
Views: 40172

Re: [?]: RSLOGIX500 V9.00.00 ACTIVATION problem

duckman wrote:Hi Ronnie, the license file is for rslogix500 pro, serial # will need to be 1014123456 or any #'s after 1014 up to 10 digits.
Regards

I did the above and I am still not getting full activation just a 7 day expiration notice.
by Ronny_Resistor
Thu Feb 13, 2014 7:38 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [?]: RSLOGIX500 V9.00.00 ACTIVATION problem
Replies: 15
Views: 40172

[?]: RSLOGIX500 V9.00.00 ACTIVATION problem

I have tried several times to activate the RSLOGIX500 software including starting from scratch: am I missing something here ?? I edit the Hex edit 34 02 at FC339 I have added the following to my Factory Talk FEATURE RS500P.exe flexsvr 1.00 permanent 10 VENDOR_STRING=9999999 \ HOSTID=ANY vendor_info=...
by Ronny_Resistor
Wed Feb 12, 2014 11:31 pm
Forum: Utilites for Simatic PLC
Topic: [?]: SIEMENS PG635 SYSTEM DISK ????
Replies: 0
Views: 3126

[?]: SIEMENS PG635 SYSTEM DISK ????

A friend went to an auction and picked up an older Siemens PG635 I know its DOS (maybe CP/M, not sure how you would tell). It has two floppy drives. I cleaned the unit up and looks really nice. (Brings back memories of programming days 25+ years ago). I can power it up and then the unit asks for a ...
by Ronny_Resistor
Wed Oct 30, 2013 3:21 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: RSlogix 5000 V20.01.00 activate
Replies: 22
Views: 27424

Re: Allen Bradley Activation Files (Names)

In your list of Activations where does motoman and Fanuc fit into this Licensing scheme ?
by Ronny_Resistor
Tue Oct 29, 2013 4:56 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Anyone able to provide a link for softlogix5800
Replies: 3
Views: 2582

Re: Anyone able to provide a link for softlogix5800

Never mind. Thank you for the update Prushmere. I tried to install RSTeststand V2.0 on Windows 7 32 and 64 bit it doesn't work. On execution it keep hanging, even though I have asked for Windows Compatibility XP service pack3 no dice. Anyway Thank you for the response I will try Windows XP. (no)
by Ronny_Resistor
Mon Oct 28, 2013 7:22 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Anyone able to provide a link for softlogix5800
Replies: 3
Views: 2582

Re: Anyone able to provide a link for softlogix5800

Just wondering can Softlogix run on a windows 7 platform ? (64 bit) I keep getting an error:
by Ronny_Resistor
Fri Oct 25, 2013 2:43 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Anyone able to provide a link for softlogix5800
Replies: 3
Views: 2582

Anyone able to provide a link for softlogix5800

Hello I am looking for the following AB software(s) Installations. Please provide me with Softlogix5800(V19 or V20) download ??(for personal use) And I am also looking for RSTeststand either an EVSI key for the older version (<3.0) that I have or the latest version of RSTeststand(V4.0)download. Than...
by Ronny_Resistor
Fri Oct 25, 2013 2:35 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [?]: RSLOGIX5000 V19 and V20
Replies: 3
Views: 8589

Re: [?]: RSLOGIX5000 V19 and V20

Never mind..... I was able to work with the info posted on this web site with regards to activations.
(tyou)
by Ronny_Resistor
Wed Oct 23, 2013 6:05 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: [?]: RSLOGIX5000 V19 and V20
Replies: 3
Views: 8589

[?]: RSLOGIX5000 V19 and V20

I am new to this web site so I will try to be brief, please do not tell me to buy a legit copy etc. I have worked with Logix based software most of my life. Early on I received a key that was on a USB stick that allowed me to transfer the key onto my notebook. RSLOGIX5000 V19 on a 64-bit operating s...