Search found 47 matches

by krcedinac
Thu Oct 04, 2018 1:19 pm
Forum: SIMATIC HMI
Topic: [?]: Web Navigator v6.2 on OS of PCS7 licencing problem
Replies: 19
Views: 17746

Re: [?]: Web Navigator v6.2 on OS of PCS7 licencing problem

Hello CoMod,

I saw that file but did not check which are the licences in EKB. I added those on your screenshot , after it asked for three more and now it works.
We need to put 7 different keys in order to make it work (h)
Thanks for your help...again!
by krcedinac
Tue Oct 02, 2018 1:45 pm
Forum: SIMATIC HMI
Topic: [?]: Web Navigator v6.2 on OS of PCS7 licencing problem
Replies: 19
Views: 17746

Re: [?]: Web Navigator v6.2 on OS of PCS7 licencing problem

Hello CoMod again after long time,
Same story PCS7 v.9.0 installed all keys for web navigator but it keeps giving message The Server is currently in Demo Mode.
I used keys from EKB 10.08.2017 for PCS v.9.0
What data you need this time to tell me what to install?

Thanks in advance
by krcedinac
Tue Aug 02, 2011 8:56 am
Forum: SIMATIC HMI
Topic: [?]: Web Navigator v6.2 on OS of PCS7 licencing problem
Replies: 19
Views: 17746

Re: [?]: Web Navigator v6.2 on OS of PCS7 licencing problem

Thanks CoMod.... it is working ! I could not find SIFLA9LB100602 in EKB! Can you please explaing me what was the problem because either ALM or EKB (requested keys) did not point me out what I should install! If I want to add more then 3 Clients than I suppose I should delete these keys and install o...
by krcedinac
Mon Aug 01, 2011 12:54 pm
Forum: SIMATIC HMI
Topic: [?]: Web Navigator v6.2 on OS of PCS7 licencing problem
Replies: 19
Views: 17746

[?]: Web Navigator v6.2 on OS of PCS7 licencing problem

Hello to all, I recently installed Web Navigator v6.2 on OS of PCS7 contrlol system. I used EKB 22.05.2011 and installed SIFLA9WSN40602 key for 50 Clients. When ever I connect I have a following message: WinCC Web Navigator, The Service is currently running in Demo Mode! although the key I installed...
by krcedinac
Wed Dec 15, 2010 10:51 am
Forum: SIMATIC system
Topic: PCS7 PO booking problem
Replies: 0
Views: 1239

PCS7 PO booking problem

Hello to all, I am trying to configure PCS7 system for the first time and I have a problem that when I download CFC it does not want to book PO althought I installe AS RT PO licence. Please take a look at screenshots... http://img408.spamm.us/img408/7594/bookingf.th.jpg http://img43.spamm.us/img43/8...
by krcedinac
Thu Apr 29, 2010 10:50 am
Forum: Drivers and Inverters
Topic: Request: software for SSD Parker (ex Euroterm) 890 drives
Replies: 1
Views: 4546

Request: software for SSD Parker (ex Euroterm) 890 drives

Hello to all,

I need a programing software for SSD Parker (ex Euroterm) 890 drives.
I need version 2.07 or higher if posible.

Thanks in advance...

Krcedinac
by krcedinac
Thu Mar 04, 2010 1:57 pm
Forum: Other PLC
Topic: [?]: EPAS-4 V24 key
Replies: 3
Views: 3884

Re: [?]: EPAS-4 V24 key

Hello to all,

Can you please upload EPAS 4 v24.

Thanks in advance...
by krcedinac
Fri Nov 27, 2009 1:53 pm
Forum: SIMATIC system
Topic: [?]CP5711 installation problem to the VMware virtual machine
Replies: 0
Views: 2347

[?]CP5711 installation problem to the VMware virtual machine

Hello to all, Recently I was forced to chnage my lap top. Before that I converted it to the VMware virtual machine. It kept all it`s functionality except to act as a PC station so I ordered new CP5711. I upgraded my Step 7 to V5.4+SP5+HF1 and virtual machine recognizes new hardware CP5711, starts dr...
by krcedinac
Fri Nov 27, 2009 9:48 am
Forum: Drivers and Inverters
Topic: Request: Eurotherm/Parker DSD
Replies: 13
Views: 20186

Re: Request: Eurotherm/Parker DSD

Here is a link for you:
Link_is_Dead :(/312856704/DSD.Link_is_Dead :(
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.

This limit is reached.
by krcedinac
Thu May 21, 2009 9:16 am
Forum: SIMATIC system
Topic: [?]: How to compare 2 ,3 ,4 .... real number in CFC
Replies: 2
Views: 2100

Image
by krcedinac
Wed Feb 11, 2009 8:06 am
Forum: Other HMI
Topic: [?]: GSD file ESA VT170W
Replies: 2
Views: 3331

Esa VT170W is a panel. So you can not download it in the PLC. For downloading the aplication to the panel you need ESA VTWIN software.

http://www.eason.com/datasheets/VTWIN/index.htm
by krcedinac
Mon Dec 22, 2008 8:40 am
Forum: SIMATIC HMI
Topic: [?+]: WinCC v5.1 SP2 licence problem
Replies: 2
Views: 2714

Thank you, I did not know that. It works good now
by krcedinac
Mon Dec 22, 2008 7:57 am
Forum: SIMATIC HMI
Topic: [?+]: WinCC v5.1 SP2 licence problem
Replies: 2
Views: 2714

[?+]: WinCC v5.1 SP2 licence problem

Image

Do you have any ideas?
by krcedinac
Tue Nov 25, 2008 2:06 pm
Forum: SIMATIC HMI
Topic: [?]: Siemens TP177B time and date
Replies: 1
Views: 2497

[?]: Siemens TP177B time and date

Hello to all,

I use first time this TP and so far was never interested in time and date on the panel. I set up time and date in the Control Panel but when the panel is powerd off and on the time and date gets back to 2007...12:00am.

What is necessary to have these data permanent?

Regards
by krcedinac
Fri Nov 21, 2008 9:07 am
Forum: Drivers and Inverters
Topic: [LINK]: manual keb inverter combivert 56
Replies: 2
Views: 4818

I hope that this is what you are looking for...

Link_is_Dead :(/165898392/Keb.rar
or
http://narod.ru/disk/3901746000/Keb.Link_is_Dead :(
4.4 mb
by krcedinac
Wed Nov 19, 2008 2:09 pm
Forum: SIMATIC HMI
Topic: [?]: How transfer licence to TP177B PN/DP ?
Replies: 3
Views: 3419

Hello CoMod, Thanks for answering. I use WinCCFlex 2007 Advanced and ALM 3.0.I tried to transfer the key both with Ethernet and MPI/DP and I get same message. http://www.plctalk.net/qanda/uploads/ALM12.JPG I know for sure that both Ethernet and Profibus are working and both adreses are good. I do no...
by krcedinac
Wed Nov 19, 2008 1:00 pm
Forum: SIMATIC HMI
Topic: [?]: How transfer licence to TP177B PN/DP ?
Replies: 3
Views: 3419

[?]: How transfer licence to TP177B PN/DP ?

Hello to all

How to transfer licence key to the Tp177 PN/DP panel.
I never had to do it until now.
When I try to use ALM it says that it needs to be installed on the target PC (panel) and also I can not see it (panel) on my LAN althought that Smart Acces is working.

Thanks in advance
by krcedinac
Tue Sep 30, 2008 1:35 pm
Forum: Other PLC
Topic: [LINK]: USB over Network key
Replies: 3
Views: 3760

crack not working

Hello to all,

After 15 days it asked for key althught it says that it is cracked on strat up.

Image

Can anybody share a valid key?

Thanks
by krcedinac
Tue Aug 26, 2008 1:04 pm
Forum: Other PLC
Topic: [LINK]: USB over Network key
Replies: 3
Views: 3760

It should work. Thank you
by krcedinac
Mon Aug 25, 2008 6:39 am
Forum: Other PLC
Topic: [LINK]: USB over Network key
Replies: 3
Views: 3760

[LINK]: USB over Network key

Hello to all, Maybe this is not subject for this forum but I need the key for the USB over Network software in order to connect my Virtual PC with PC Adapter. It works and is very usefull but they only give 15 days trial version. All versions starting with v2.2 supports Virtual PC. Actual version is...
by krcedinac
Tue Aug 12, 2008 6:20 am
Forum: Other HMI
Topic: Request: soft for CTC Parker PS10 touch panel
Replies: 5
Views: 4936

Hola compadre,

It is good enough. I will use it with Virtual PC that can control serial port.In that way you can use it many times, of course always with new virtual machine.

Saludos
by krcedinac
Mon Aug 11, 2008 9:25 am
Forum: Other HMI
Topic: Request: soft for CTC Parker PS10 touch panel
Replies: 5
Views: 4936

Request: soft for CTC Parker PS10 touch panel

Hello to all, I have problems with CTC Parker PS10 touch panel. The software that is used for its config is MachineShop wich is part of InteractX programing package. Does anybody has this software to upload and/or expirience with this panels? It is conected to G&L motion controler. Does anybody know...
by krcedinac
Wed Apr 30, 2008 7:53 am
Forum: Other HMI
Topic: [LINK]: UNISOFT
Replies: 4
Views: 4952

If it is a Control Techniques then here it is.

Link_is_Dead :(/111450137/usoft343.zip.html
by krcedinac
Fri Dec 14, 2007 8:13 am
Forum: Drivers and Inverters
Topic: [?+]: EASY Drive SIEI TPD 32
Replies: 2
Views: 5826

Hello brave eagle,

I found it .... thank you very much.
by krcedinac
Thu Dec 13, 2007 10:19 am
Forum: Drivers and Inverters
Topic: [?+]: EASY Drive SIEI TPD 32
Replies: 2
Views: 5826

[?+]: EASY Drive SIEI TPD 32

Hello to all,

Does somebody may be have software for programing SIEI TPD 32 dc regulator. It is urgent and it would be highly appreciated if someone could share...

Thanks in advance :!: :!:
by krcedinac
Mon Nov 05, 2007 8:07 am
Forum: Other HMI
Topic: [?+]: PROFACE cable
Replies: 1
Views: 3552

Hello Zvocko,

http://www.profaceuk.com/Support/Driver_Desc.asp?ID=24

In the document that you can download on the following page I think you can find what you need.
by krcedinac
Thu Nov 01, 2007 12:54 pm
Forum: SIMATIC system
Topic: [?]: How config PLCSIM to simulate CFC program ?
Replies: 11
Views: 9918

Hello, I am a little bit confused.... what do you actualy want to do? Download to PLCSIM ( PLC simulator) to test or download to real PLC in order to test your CFC application. If it is PLCSIM you do not need PCMCIA or other adapter. If you want to do it with real PLC you need to set PG/PC connectio...
by krcedinac
Tue Oct 30, 2007 7:24 am
Forum: SIMATIC system
Topic: [?]: How config PLCSIM to simulate CFC program ?
Replies: 11
Views: 9918

Hello,

When you download S7 program to PLCSIM you also download CFC charts and you can test it on line (in simulator of course).

Regards
by krcedinac
Tue Oct 09, 2007 12:53 pm
Forum: SIMATIC system
Topic: [?]: CFC problem
Replies: 1
Views: 2385

For example with the word it can be done like this: http://www.plctalk.net/qanda/uploads/conv99.JPG Code for the Word to Real conversio function Conv_W_R is: L #Word_IN ITD DTR T #Out_data OP_A block that passes real value when ti boolean input is on I think can be found in standard librarys. You ca...
by krcedinac
Tue Jun 12, 2007 12:59 pm
Forum: SIMATIC HMI
Topic: [?]: problem with User Archives set up
Replies: 1
Views: 2751

[?]: problem with User Archives set up

Hello to all, I have been trying to set up User Archives in WinCC (add in the existing project) by following the wizard and reading the manual. But, what ever I do I always have same message in the log file when I start the run time: [06/12/07 12:10:24] CUARuntime::Connect to RT database failed [06/...
by krcedinac
Sat Mar 03, 2007 11:58 am
Forum: Drivers and Inverters
Topic: Request: DriveTop for configuring Indramat
Replies: 3
Views: 10939

Request: DriveTop for configuring Indramat

Hello everybody,

Does anyone have DriveTop16V09 software for configuring Indramat DKC11.3-040-7 drive. Please upload and send me the link if it is possible.

Thanks in advance.
by krcedinac
Mon Nov 27, 2006 11:06 am
Forum: samples
Topic: DP/DP coupler
Replies: 1
Views: 6498

DP/DP coupler

Hello,

Can somebody please upload example project where DP/DP coupler is used for communication between two master profibus network.

Thanks in advance,

Krcedinac
by krcedinac
Thu Nov 02, 2006 8:33 am
Forum: Other PLC
Topic: Problems with ESA VT585W TP
Replies: 0
Views: 2424

Problems with ESA VT585W TP

Hello friends, This morning when I came to the mill Touch Panel that controls the hood was not responding to the touching. I tried to switch it of and on but it was always on the Alarm page. I reseted alarm from the local controls panel and it went back to the Welcome page, still not responding to t...
by krcedinac
Thu Nov 02, 2006 8:32 am
Forum: Other HMI
Topic: Problems with ESA VT585W touch panel
Replies: 1
Views: 4170

Problems with ESA VT585W touch panel

Hello friends, This morning when I came to the mill Touch Panel that controls the hood was not responding to the touching. I tried to switch it of and on but it was always on the Alarm page. I reseted alarm from the local controls panel and it went back to the Welcome page, still not responding to t...
by krcedinac
Tue Oct 10, 2006 11:05 am
Forum: Other HMI
Topic: Request: Panel Builder 32 >=v3.8
Replies: 0
Views: 3023

Request: Panel Builder 32 >=v3.8

Hello,

Can somebody please upload new version of Panel Builder 32.
I have version 3.70 but some applications that I have on a new machine are problably written with 3.8 or 3.82 and I need to make some modificationes.

Thanks in advance
by krcedinac
Tue Aug 15, 2006 7:39 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: Request: AB software
Replies: 0
Views: 4585

Request: AB software

Hello everybody,

I dont have much expirience with RSLogix500 and I am wondering if exists some software similar to PLCSIM (Siemens PLC) for SLC500 :?: . If exists please can you give me a link for downloading.

Thanks in advance :wink:
by krcedinac
Wed Aug 09, 2006 7:01 am
Forum: Other (only about CAD and Soft)
Topic: *.rar files procedure to get together?
Replies: 1
Views: 4073

Tienes que tener todas partes en un sitio - en una carpeta y solamente con WinRAR abres archivo numero uno. :wink:
by krcedinac
Thu Jul 20, 2006 1:04 pm
Forum: Simatic HMI (Russian)
Topic: установка WinCC v6 на XP
Replies: 2
Views: 4782

1 Open the operating system Start menu and select "Settings" > "Control Panel" > "Add or Remove Programs". 2 Click on the "Add or Remove Windows Components" button in the left-hand menu bar. The "Windows Components Wizard" opens. 3 Select the component "Message Queuing". The "Details" button is acti...
by krcedinac
Tue Jul 18, 2006 6:31 am
Forum: SIMATIC HMI
Topic: i need crack of winCC with SP2
Replies: 3
Views: 4136

Hello,

Here you have all the keys that you need since you did not specify which version of the WinCC... :D
Link_is_Dead :(/files/6154214/Sima ... 3.zip.html
by krcedinac
Wed Jun 21, 2006 4:59 pm
Forum: SIMATIC system
Topic: Request: installation disk for CP5611
Replies: 2
Views: 3910

Request: installation disk for CP5611

Hello everybody, I need urgently installation disk for CP5611. If someone can upload and give me the link it would help me very much. Thanks.
by krcedinac
Wed May 31, 2006 10:02 am
Forum: Other PLC
Topic: SPC Win
Replies: 0
Views: 3014

SPC Win

Hello everybody,

I would like to get in the possesion of SPC Win software package used for calibration and set up of BTG equipment. Please send me the link for downloading if possible.

Thanks in advance...
by krcedinac
Wed May 17, 2006 12:06 pm
Forum: SIMATIC system
Topic: Как склеить (How combine RAR) Step 7 v5.4 ?
Replies: 2
Views: 4016

If you have WinRAR you just start extracting part1.rar file (for both CDs) and it will extract everything to the folder where you point. After that you can make CDs with NERO or whatever...
by krcedinac
Wed May 17, 2006 11:58 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: активация RSLogix
Replies: 1
Views: 6037

buy removable 1.4 disc :D
by krcedinac
Tue Apr 11, 2006 8:27 am
Forum: SIMATIC HMI
Topic: Request: Keys WinCC 4.02
Replies: 0
Views: 3259

Request: Keys WinCC 4.02

Hello, can tell me where to find keys for WinCC 4.02?
Thanks :D