Hi,
This is for home use, i bought this as scrap but the CF card was missing.
Just to experiment a bit with WinAC.
Greetings.
Thermo.
Search found 38 matches
- Wed Nov 21, 2012 6:25 pm
- Forum: SIMATIC system
- Topic: WIN LC on a microbox
- Replies: 3
- Views: 3090
- Wed Nov 21, 2012 4:50 pm
- Forum: SIMATIC system
- Topic: WIN LC on a microbox
- Replies: 3
- Views: 3090
WIN LC on a microbox
Hi All, i'm trying to reinstall WINLC (WINAC 2010) on a $iemen$ microbox IPC427C. I installed the licence for WinLC with EKB but it keeps comming back with "there is no licence for WINLC". I read i a previuos post that installing the short keys for WINAC V4.0 V4.1 solves this problem , the only thin...
- Mon May 21, 2012 2:31 pm
- Forum: Allen-Bradley (Rockwell Automation)
- Topic: [?]: remote programming a 5/05 CPU on the ethernet port
- Replies: 0
- Views: 3749
[?]: remote programming a 5/05 CPU on the ethernet port
Hi all,
is it possible to remote programm a 5/05 CPU trough the onboard ethernet port over internet ?
Kind Regards
Thermo
is it possible to remote programm a 5/05 CPU trough the onboard ethernet port over internet ?
Kind Regards
Thermo
- Sun Oct 30, 2011 11:18 am
- Forum: SIMATIC system
- Topic: Request: ITS PLC MHJ EDITION
- Replies: 15
- Views: 29440
Re: Request: ITS PLC MHJ EDITION
There is also Virtual Universe , connects to S7,Plcsim ,...
- Mon Oct 03, 2011 4:34 pm
- Forum: SIMATIC system
- Topic: [LINK]: Step7 program of a Krones filler (elektro-pneumatic)
- Replies: 4
- Views: 4617
Re: [?]: Step7 program of a Krones filler (elektro-pneumatic
Thank you very much ,
this will be a great help.
Thermo
this will be a great help.
Thermo
- Sun Oct 02, 2011 11:05 am
- Forum: SIMATIC system
- Topic: [LINK]: Step7 program of a Krones filler (elektro-pneumatic)
- Replies: 4
- Views: 4617
[LINK]: Step7 program of a Krones filler (elektro-pneumatic)
Hi all ,
i'm looking for the Step7 program of a Krones filler witch uses elektro-pneumatic valves instead of mechanical ones to fill the bottles.
this would be greatly appreciated.
Kind Regards
Thermonuclear
i'm looking for the Step7 program of a Krones filler witch uses elektro-pneumatic valves instead of mechanical ones to fill the bottles.
this would be greatly appreciated.
Kind Regards
Thermonuclear
- Sat Sep 17, 2011 2:51 pm
- Forum: SIMATIC system
- Topic: [LINK]: Processim
- Replies: 1
- Views: 2348
- Sat Sep 17, 2011 1:43 pm
- Forum: SIMATIC system
- Topic: [LINK]: Processim
- Replies: 1
- Views: 2348
[LINK]: Processim
Hi ,
can anyone have a go at this :http://www.hecfh.be/processim/index/index_fr.php
looks better than TrySim.
Thanks in advance.
Thermonuclear
can anyone have a go at this :http://www.hecfh.be/processim/index/index_fr.php
looks better than TrySim.
Thanks in advance.
Thermonuclear
- Mon Aug 01, 2011 9:36 am
- Forum: SIMATIC system
- Topic: Request: Virtual Universe simulate Simatic S7 in 3D
- Replies: 2
- Views: 2452
Re: Request: Virtual Universe simulate Simatic S7 in 3D
Hi SHKODRAN,
there is just a time limit of 40 days it seems , the software is completely functional during that period .
If you can fix this I'll be very gratefull to you.
Best Regards
Thermonuclear .
there is just a time limit of 40 days it seems , the software is completely functional during that period .
If you can fix this I'll be very gratefull to you.
Best Regards
Thermonuclear .
- Sat Jul 30, 2011 4:47 pm
- Forum: SIMATIC system
- Topic: Request: Virtual Universe simulate Simatic S7 in 3D
- Replies: 2
- Views: 2452
- Thu Jul 28, 2011 4:30 pm
- Forum: Utilites for Simatic PLC
- Topic: [?] Unpassword functions
- Replies: 4
- Views: 16013
- Thu Jul 28, 2011 4:24 pm
- Forum: Utilites for Simatic PLC
- Topic: [?] Unpassword functions
- Replies: 4
- Views: 16013
Re: [?] Unpassword functions
Or Heliumtool , even better than Canopener.
Kind Regards
Kind Regards
- Fri Jul 22, 2011 2:46 pm
- Forum: SIMATIC system
- Topic: Request: 3D Simulation with S7
- Replies: 1
- Views: 2461
- Fri Jul 22, 2011 2:25 pm
- Forum: SIMATIC system
- Topic: Request: 3D Simulation with S7
- Replies: 1
- Views: 2461
Request: 3D Simulation with S7
Hi all ,
actually stumbled on this : http://www.slhome.com/index.php?id=msm_2100.
its downloadable but have to buy a time-license .
Did anyone seen this before or has a medicine for it.
Greetings
Thermonuclear
actually stumbled on this : http://www.slhome.com/index.php?id=msm_2100.
its downloadable but have to buy a time-license .
Did anyone seen this before or has a medicine for it.
Greetings
Thermonuclear
- Sun Jun 12, 2011 4:18 pm
- Forum: Allen-Bradley (Rockwell Automation)
- Topic: [?]: WIN 7 and (RS Emulate 5000 V 19 or NI soft)
- Replies: 1
- Views: 3079
[?]: WIN 7 and (RS Emulate 5000 V 19 or NI soft)
Hi all,
If RS Emulate does not work on WIN 7 , make sure nothing from National Instruments is installed on the computer.
Just found this out after debugging with WinDbg.
Hope this helps someone.
Thermonuclear
If RS Emulate does not work on WIN 7 , make sure nothing from National Instruments is installed on the computer.
Just found this out after debugging with WinDbg.
Hope this helps someone.
Thermonuclear
- Sat Jan 01, 2011 6:22 pm
- Forum: SIMATIC system
- Topic: [?]: CPU Mode Key
- Replies: 3
- Views: 3425
Re: [?]: CPU Mode Key
Hi ,
I have plenty laying about.
Give your adress and I'll send one over.
Regards
Thermonuclear
I have plenty laying about.
Give your adress and I'll send one over.
Regards
Thermonuclear
- Mon Dec 13, 2010 6:35 pm
- Forum: SIMATIC system
- Topic: [?]: S5-95U Trough Profibus to a 443-5 Basic
- Replies: 2
- Views: 2047
Re: [?]: S5-95U Trough Profibus to a 443-5 Basic
Hi manus_a ,
I've got the thing running with 20 95 u's .
Thank you for your help.
ThermoNuclear
I've got the thing running with 20 95 u's .
Thank you for your help.
ThermoNuclear
- Wed Dec 08, 2010 10:43 pm
- Forum: SIMATIC system
- Topic: [?]: Aplication of one print a label with S5.
- Replies: 1
- Views: 1771
Re: [?]: Aplication of one print a label with S5.
Hi ,
done this a lot of times with a BASIC CP ,I'll have to search for the code because it was a long time ago.
contact you soon.
ThermoNuclear
done this a lot of times with a BASIC CP ,I'll have to search for the code because it was a long time ago.
contact you soon.
ThermoNuclear
- Wed Dec 08, 2010 10:33 pm
- Forum: SIMATIC system
- Topic: [?]: S5-95U Trough Profibus to a 443-5 Basic
- Replies: 2
- Views: 2047
[?]: S5-95U Trough Profibus to a 443-5 Basic
Hi all ,
i want to connect ten(10) S5-95's trough profibus to a CP 443-5 basic using the FDL Layer 2.
I have a working test with one 95U .
did anyone did this with more than one 95 U.
Kind Regards
ThermoNuclear
i want to connect ten(10) S5-95's trough profibus to a CP 443-5 basic using the FDL Layer 2.
I have a working test with one 95U .
did anyone did this with more than one 95 U.
Kind Regards
ThermoNuclear
- Sun Nov 21, 2010 1:50 pm
- Forum: About forum , files exchangers and RULES
- Topic: [?]: Rapidshare is behaving strang
- Replies: 0
- Views: 8299
[?]: Rapidshare is behaving strang
Hi all ,
rapidshare is behaving strange , they ask for additional credits to download.
did anyone else experience the same ?
Thermonuclear.
rapidshare is behaving strange , they ask for additional credits to download.
did anyone else experience the same ?
Thermonuclear.
- Sun Nov 14, 2010 10:56 am
- Forum: SIMATIC system
- Topic: [?]: Thermocouple module
- Replies: 6
- Views: 3303
Re: THERMOCOUPLE MODULE
Hi ,
do you have the proper cold- and hot- junction compensation in place . These parasitic "measurements " could eliminate your actual measurement.
Regards ,
ThermoNuclear.
do you have the proper cold- and hot- junction compensation in place . These parasitic "measurements " could eliminate your actual measurement.
Regards ,
ThermoNuclear.
- Thu Nov 11, 2010 1:41 pm
- Forum: SIMATIC system
- Topic: Request: Matrikon TaiJi PID
- Replies: 0
- Views: 1769
Request: Matrikon TaiJi PID
Hi all ,
did anybody came across this ?
http://www.matrikon.com/control-perform ... uning.aspx
A key or medicine would be greatly appreciated.
Kind Regards .
Thermonuclear
did anybody came across this ?
http://www.matrikon.com/control-perform ... uning.aspx
A key or medicine would be greatly appreciated.
Kind Regards .
Thermonuclear
- Sun Aug 22, 2010 5:10 pm
- Forum: Siemens Hardware & Software
- Topic: Request: software and documentation for Krones Machines
- Replies: 25
- Views: 49411
Re: Request: software and documentation for Krones Machines
What do you want?
I've got it all ,fillers,labelers,transport,mouldblowmachines , and on.......
Thermonuclear
I've got it all ,fillers,labelers,transport,mouldblowmachines , and on.......
Thermonuclear
- Sun May 16, 2010 1:55 pm
- Forum: SIMATIC system
- Topic: [?]: How can I use one button for start-stop in s7-300
- Replies: 4
- Views: 3830
Re: [?]: How can I use one button for start-stop in s7-300
Hi
The second one is the old S5 trick witch did not have FP.
ThermoNuclear
The second one is the old S5 trick witch did not have FP.
ThermoNuclear
- Sun May 16, 2010 1:47 pm
- Forum: SIMATIC system
- Topic: [LINK]: ProC/C++ for M7-300 and M7-400 Writing C Programs
- Replies: 3
- Views: 7285
Re: [LINK]: ProC/C++ for M7-300 and M7-400 Writing C Program
Thanks a lot.
ThermoNuclear
- Tue Apr 13, 2010 11:26 am
- Forum: SIMATIC system
- Topic: Request: Simulation X
- Replies: 0
- Views: 1743
Request: Simulation X
Hi everyone ,
does anyone have Simulation X Ver. 3.x
It can be used to simulate process systems in a Simatic PLC (only version 3 and up)
Website: http://www.iti.de/en/simulationx.html
Kind regards
ThermoNuclear
does anyone have Simulation X Ver. 3.x
It can be used to simulate process systems in a Simatic PLC (only version 3 and up)
Website: http://www.iti.de/en/simulationx.html
Kind regards
ThermoNuclear
- Tue Apr 13, 2010 10:41 am
- Forum: SIMATIC system
- Topic: [?]: patch for FuzzyTech 5.8
- Replies: 0
- Views: 2121
[?]: patch for FuzzyTech 5.8
Hi everyone ,
does someone have a patch or keygen for FuzzyTech Ver.5.8
With this package it is possible to create complex fuzzycontrollers in a Simatic 400 PLC.
Website : http://www.fuzzytech.de/
Kind Regards
ThermoNuclear
does someone have a patch or keygen for FuzzyTech Ver.5.8
With this package it is possible to create complex fuzzycontrollers in a Simatic 400 PLC.
Website : http://www.fuzzytech.de/
Kind Regards
ThermoNuclear
- Sat Apr 10, 2010 11:26 am
- Forum: SIMATIC system
- Topic: [LINK]: ProC/C++ for M7-300 and M7-400 Writing C Programs
- Replies: 3
- Views: 7285
[LINK]: ProC/C++ for M7-300 and M7-400 Writing C Programs
Hi ,
does anyone have M7-ProC/C++ laying about.
I can't find it anywhere.
Thanks in advance
T.N.
does anyone have M7-ProC/C++ laying about.
I can't find it anywhere.
Thanks in advance
T.N.
- Mon Apr 05, 2010 12:55 pm
- Forum: SIMATIC HMI
- Topic: [?]: Convert WinCC to WinCC Flexible
- Replies: 2
- Views: 3332
Re: [?]: Convert WinCC to WinCC Flexible
Thanks for your quick respons.
ThermoNuclear
- Mon Apr 05, 2010 12:27 pm
- Forum: SIMATIC HMI
- Topic: [?]: WinCC Flexible 2008 on Panel PC embedded XP
- Replies: 5
- Views: 5441
Re: [?]: WinCC Flexible 2008 on Panel PC embedded XP
Hi ,
also tried with license on USB Stick -> no luck
also tried with license on USB Stick -> no luck
- Mon Apr 05, 2010 12:10 pm
- Forum: SIMATIC HMI
- Topic: [?]: WinCC Flexible 2008 on Panel PC embedded XP
- Replies: 5
- Views: 5441
Re: [?]: WinCC Flexible 2008 on Panel PC embedded XP
Hi , ALM V4.0 is installed on the Panel. Tried to install the license with EKB locally on the Panel -> no luck. Tried to install on a PG with EKB , than transfer with ALM over the network to the Panel -> no luck. On the panel i can not see the AX NF ZZ dir for some reasone and EKB says the license i...
- Mon Apr 05, 2010 11:14 am
- Forum: SIMATIC HMI
- Topic: [?]: Convert WinCC to WinCC Flexible
- Replies: 2
- Views: 3332
[?]: Convert WinCC to WinCC Flexible
Hi everyone ,
is there a way to convert the graphics files from WinCC to WinCC flex 2008 ?
Kind Regards
ThermoNuclear
is there a way to convert the graphics files from WinCC to WinCC flex 2008 ?
Kind Regards
ThermoNuclear
- Mon Apr 05, 2010 11:05 am
- Forum: SIMATIC HMI
- Topic: [?]: WinCC Flexible 2008 on Panel PC embedded XP
- Replies: 5
- Views: 5441
[?]: WinCC Flexible 2008 on Panel PC embedded XP
Hi, I installed WinCC Flex 2008 on a $iemen$ Panel PC with XP embedded as the OS. After i installed the keys with EKB (4096 Tags) but WinCC Flex stays in DEMO mode . I have the same problem with another PanelPC with a SimanticNet Lean version on it. Does anyone have a solution. PS. the install proce...
- Sun Apr 04, 2010 5:26 pm
- Forum: SIMATIC system
- Topic: [?]: Windows7 and Simatic manager problem
- Replies: 6
- Views: 11437
Re: [?]: Windows7 and Simatic manager problem
Hi ,
try running the S7 as "administrator" using right mouse click.
ThermoNuclear
try running the S7 as "administrator" using right mouse click.
ThermoNuclear
- Sat Apr 03, 2010 6:46 pm
- Forum: SIMATIC system
- Topic: [?]: S7-300 diferent errors after 2 year of work.
- Replies: 9
- Views: 8710
Re: [?]: S7-300 diferent errors after 2 year of work.
Hi zvocko ,
try to exchange the small black "bridges" between the cards .
they have caused some similar problems for me in the past.
Good Luck,
ThermoNuclear
try to exchange the small black "bridges" between the cards .
they have caused some similar problems for me in the past.
Good Luck,
ThermoNuclear
- Mon Mar 29, 2010 6:34 pm
- Forum: Other HMI
- Topic: Request: eXpertune Planttriage
- Replies: 1
- Views: 2432
Request: eXpertune Planttriage
Hi everybody , does someone have eXpertune or PlantTriage ? http://www.expertune.com/PlantTriage.html The PlantTriage® Control Loop Monitoring system watches your plant 24 hours a day, then prioritizes and diagnoses each improvement opportunity. If you have hundreds or thousands of control loops, yo...
- Mon Mar 29, 2010 4:43 pm
- Forum: SIMATIC system
- Topic: [?]: License-key for NeuroFuzzy ?
- Replies: 0
- Views: 1597
[?]: License-key for NeuroFuzzy ?
Hi everyone ,
nice to see the site back online.
Does anyone have a license-key for NeuroFuzzy from Siemens
Thanks in advance
Thermo.
nice to see the site back online.
Does anyone have a license-key for NeuroFuzzy from Siemens
Thanks in advance
Thermo.
- Sat Mar 06, 2010 8:51 pm
- Forum: SIMATIC system
- Topic: Request: ProFuzzy++ 5
- Replies: 0
- Views: 1860
Request: ProFuzzy++ 5
Hi ,
does anyone have a working copy and key of SiemenS Profuzzy 5 ?
Most links I found on this site are broken.
Many thanks
TN
does anyone have a working copy and key of SiemenS Profuzzy 5 ?
Most links I found on this site are broken.
Many thanks
TN