Search found 59 matches

by georg_demmler
Thu Feb 01, 2024 12:12 pm
Forum: Other PLC
Topic: I need to open .stu
Replies: 2
Views: 189

Re: I need to open .stu

Hello,

an .STU file is a working project file created in Unity Pro from Schneider.

But you need perhaps the same version, which was created.

If not, you get perhaps some errors.

Hope it helps

George
by georg_demmler
Fri Jan 19, 2024 8:24 am
Forum: SIMATIC system
Topic: [?]: S7-300 not reachable in Run mode
Replies: 10
Views: 680

Re: [?]: S7-300 not reachable in Run mode

Hello, good question - TIA or Step7 Which type of PLC has a integrated Profinet - S7-300 need always a CP - I think there is no S7-300 with an integrated Profinet. How can you reach a CPU if its stop with MPI and TCP - It makes no sense - MPI is Profibus and it is integrated in the PLC and Profinet ...
by georg_demmler
Thu Jan 18, 2024 12:49 pm
Forum: SIMATIC system
Topic: [?]: S7-300 not reachable in Run mode
Replies: 10
Views: 680

Re: [?]: S7-300 not reachable in Run mode

Hello, to give a good answer is very difficult with this information - I give you the bone look for the meat. You write "it is in the internal network" - what for a networt profibus - profinet. Is the s7-300 a standalone plc or are more PLCs in the network. You write you can not reach the plc with M...
by georg_demmler
Fri Jan 12, 2024 11:48 am
Forum: SIMATIC system
Topic: [Request]: WINLOC v1.9
Replies: 4
Views: 2482

Re: [Request]: WINLOC v1.9

Hello,

if I google for WinLoc - I find some websites where you can download the program for free. Here is a link to a site, where you
can download the program - https://wiki.deutschmann.de/index.php?title=WINLOC_32. The version is now 3.x.

Hope this helps

George
by georg_demmler
Fri Jan 05, 2024 10:21 am
Forum: SIMATIC system
Topic: PCS7 FREEZES
Replies: 16
Views: 1679

Re: PCS7 FREEZES

Hello, this is what I you guess. Make a virtual maschine with Windows10 2019 LTSC (VMWare or VirtualBox). Make a copy and install PCS7 on this copy. And if something going wrong you make another copy and try again. But first you have to take the correct OS. If you buy a Siemens IPC the OS will be Wi...
by georg_demmler
Fri Nov 17, 2023 6:15 pm
Forum: SIMATIC system
Topic: [Request]: old GSDML v2.32 for IFM AL1101
Replies: 2
Views: 573

Re: [Request]: old GSDML v2.32 for IFM AL1101

Hello,

on the link - https://www.ifm.com/de/de/product/AL1101?tab=documents - you find a GSDML Version 2.3.23 (11/2019)

Hope this helps
by georg_demmler
Sun Oct 29, 2023 5:17 pm
Forum: SIMATIC HMI
Topic: External OPC UA Server to TIA Portal
Replies: 4
Views: 1001

Re: External OPC UA Server to TIA Portal

Hello,

why did you not activate the OPC-Server in your CPU?

What is the version of the CPU and what is the version of your TIA-Portal?
by georg_demmler
Fri Oct 27, 2023 3:12 pm
Forum: SIMATIC system
Topic: the type of module in slot 101 in device s7-1200 station_1 could not be identified offline
Replies: 2
Views: 677

Re: the type of module in slot 101 in device s7-1200 station_1 could not be identified offline

Hello,

one question - who makes the hardware configuration ot the project and who downloaded to the plc? Which TIA Portal / which GSD / GSML Date?

It seems - you have the wrong GSD / GSML for the CM Canopen.

Please make some screenshots of the failure and the hardware
by georg_demmler
Sun Oct 15, 2023 7:39 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: Studio 5000 Logix Designer download available?
Replies: 53
Views: 127088

Re: Studio 5000 Logix Designer download available?

Hello,

please remove all the post from Cristiano14 about Factorytalk. He flooded the forum with the post

Thanks
by georg_demmler
Fri Jun 16, 2023 6:51 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: Studio 5000 Completo
Replies: 9
Views: 3890

Re: Studio 5000 Completo

Hello,

link is not more working.

Thanks
by georg_demmler
Wed Mar 08, 2023 12:48 pm
Forum: SIMATIC system
Topic: Error BF
Replies: 1
Views: 551

Re: Error BF

Hello,

it will be nice, if we get more information, what you are doing before the BF is active. Did you something with the firmware?

So we look in a crystal ball and guess.
Image
Thanks
by georg_demmler
Sat Feb 25, 2023 2:26 pm
Forum: SIMATIC system
Topic: [?+]: Connect simotion - simatic (sfc65, sfc66)
Replies: 5
Views: 1017

Re: [?+]: Connect simotion - simatic (sfc65, sfc66)

Hello,

can you share your project - so we learn?

No idea about simotion D

Thanks
by georg_demmler
Fri Feb 17, 2023 5:56 am
Forum: SIMATIC system
Topic: [?+]: Connect simotion - simatic (sfc65, sfc66)
Replies: 5
Views: 1017

Re: Connect simotion - simatic (sfc65, sfc66)

Hello,

there is a siemens document (but in german) - Simotion Simotion Scout Kommunikation - perhaps you find a solution. We don't know nothing about your Hardware-Konfiguration, Konfiguration of your Simotion.

You can also make a Siemens request to ask for an example or some documentation.

Thanks
by georg_demmler
Thu Feb 09, 2023 9:39 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: RSLogix 5000 v20, RSView32 v7.6, RSlinx Classic OEM 3.71
Replies: 2
Views: 1714

Re: RSLogix 5000 v20, RSView32 v7.6, RSlinx Classic OEM 3.71

Hello,

please use the Search-Button and you find nearly everything.

Thanks
by georg_demmler
Sat Dec 03, 2022 4:57 pm
Forum: SIMATIC system
Topic: [?] Solutions for merging Siemens Online/Offline projects
Replies: 1
Views: 581

Re: [?] Solutions for merging Siemens Online/Offline projects

Hello, I try to explain - but I have a german version of TIA In TIA mark your project - right mouse click and you find Compare. You can compare online / offline or offline / offline. If you mark online / offline a window will open and the project will compare. The blocks which are different get a bl...
by georg_demmler
Fri Nov 18, 2022 9:08 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: Allen Bradley PLC5
Replies: 1
Views: 1287

Re: Allen Bradley PLC5

Hello,

the first version to support redundany is Automation Studio 5000 V19. We take it 2012 for a project with two redundany systems.

Greetings
by georg_demmler
Sun Sep 04, 2022 9:56 am
Forum: SIMATIC system
Topic: [?]: WINCC Unified V16 - autostart
Replies: 4
Views: 1195

Re: [?]: WINCC Unified V16 - autostart

Hello,

is "SIMATIC WinCC Unified PC Runtime V16" installed on the pc?

If you install an update for TIA - you need the "base" program.

You can*t install the Update 3 if there is not the program "SIMATIC WinCC Unified PC Runtime V16" installed on the pc.

Hope this helps
by georg_demmler
Sun Sep 04, 2022 9:35 am
Forum: SIMATIC system
Topic: [?]: WINCC Unified V16 - autostart
Replies: 4
Views: 1195

Re: [?]: WINCC Unified V16 - autostart

Hello

can you make a screenshot from the message - there is nothing in the intenet about such a message.

I need also your installed tia software and your OS-System.

Thanks
by georg_demmler
Sun Sep 04, 2022 8:50 am
Forum: SIMATIC system
Topic: [?]: WINCC Unified V16 - autostart
Replies: 4
Views: 1195

Re: [?]: WINCC Unified V16 - autostart

Hello,

my guess - take Wincc Unified V17 för your project - I make my first two projects with Unified last year - and it was not funny.

There was an advice from the Siemes guy - take V17 or wait until V18.

Help it hops.
by georg_demmler
Thu Aug 18, 2022 7:37 am
Forum: SIMATIC system
Topic: [?]: Unlock password of s7 1200
Replies: 19
Views: 14028

Re: [?]: Unlock password of s7 1200

Hello,

I' m surprised - "prova a mandarmi il file" sounds like a italian language and means - try to send my the file.

Hope this helps
by georg_demmler
Wed Aug 17, 2022 5:30 am
Forum: SIMATIC system
Topic: [?]: CPU 319 BF3 flashing red
Replies: 10
Views: 2140

Re: [?]: CPU 319 BF3 flashing red

Hello, some information about your plc. The program what you send is a I-device - that means you have a master and one (or more) I-devices. The communication between the I-device and the master is over inputs and outputs. You definied in the I-device the Inputrange and Outputrange - create a GSD-Fil...
by georg_demmler
Tue Aug 16, 2022 11:17 am
Forum: SIMATIC system
Topic: [?]: CPU 319 BF3 flashing red
Replies: 10
Views: 2140

Re: [?]: CPU 319 BF3 flashing red

Hello, this is my only comment - it is nice to get a program without any symbolic. So here is what I find - yes the program use the address 2602 Go to the hardware - select the part with the CPU 319 and on the slot X3 you find the CPU-CA140-1. Select this and you find the I-Device the address range ...
by georg_demmler
Fri Aug 12, 2022 6:35 am
Forum: SIMATIC system
Topic: [?]: CPU 319 BF3 flashing red
Replies: 10
Views: 2140

Re: [?]: CPU 319 BF3 flashing red

Hello, what do you expected from the forum ? That we guess what happens - please put some pictures about the online Hardwareconfiguration so we see the hardware. What is the Event-ID of the diag. buffer? Is the equipment old or new. How did you check "network is good". We need a little bit more info...
by georg_demmler
Thu Jun 09, 2022 8:46 am
Forum: SIMATIC system
Topic: One 4-20mA signal to two analog inputs
Replies: 3
Views: 1233

Re: One 4-20mA signal to two analog inputs

Hello, my first question, it is correct that the output signal is 4-20mA? I found in one manual 0-20mA. But I don't understand the differce between NN and MM. The transducer has 3 analoge output signals. My advise ist to test something with two analog meters in out line with the output like followin...
by georg_demmler
Tue May 31, 2022 5:35 am
Forum: SIMATIC system
Topic: How to Download safety program to F-CPU (319F-3PN/DP)
Replies: 2
Views: 831

Re: How to Download safety program to F-CPU (319F-3PN/DP)

Hello,

please ask google for 0xD242 - and perhaps the second link is from Siemens - How do you proceed after loading of the F program is aborted with error message D242?

Hope this helps

Greetings
by georg_demmler
Fri Apr 15, 2022 9:52 am
Forum: SIMATIC system
Topic: [?+]: CPU 315-2DP fault OB85
Replies: 11
Views: 2459

[?+]: CPU 315-2DP fault OB85

Hello, good to hear that. There are some points that Siemens supported: If you read / write more then 3 byte over DP so it will be better to use "DPRD_DAT" / "DPWR_DAT" It will be good, if you have one project with Master and Slave(s). You will have less trouble, if you use PUT/GET or BSEND/BRCV. Yo...
by georg_demmler
Thu Apr 14, 2022 4:36 pm
Forum: SIMATIC system
Topic: [?+]: CPU 315-2DP fault OB85
Replies: 11
Views: 2459

Re: [?]: CPU 315-2DP fault OB85

Hello, I'm not sure - but in the configuration of the DP you use Q120 with 4 words (number 5). But in the complete program there is not use of the Output 120 - 127. But the range of the CPU for Input/Output is 0.0 - 127.7 It is possible to delete the line 5 in the configuration of the DP - Who put t...
by georg_demmler
Wed Mar 23, 2022 4:55 pm
Forum: SIMATIC system
Topic: [?+]: TIA Portal Projekt Server for Multiuser Engineering
Replies: 2
Views: 1171

Re: [Request]:TIA Portal Projekt Server for Multiuser Engineering

Hello, what for a TIA Version? In TIA V16, V17 it's part of your installation - it is no more called multiuser server - it is called project server in TIA V15 it is a separate file - but TIA V15 is not more on the siemens page as trial version. But if you take TIA V15.1 it is also a part of the TIA ...
by georg_demmler
Thu Mar 17, 2022 6:28 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: how i can read data from PLC AB to other PLC AB connecting By Ehernet?
Replies: 2
Views: 1094

Re: how i can read data from PLC AB to other PLC AB connecting By Ehernet?

Hello,

look for messages or MSG instructions. You find something in the internet and also something on YT.

Thanks
by georg_demmler
Fri Mar 04, 2022 5:18 pm
Forum: Other PLC
Topic: Euchner GMOX ASi Gateway RS232 connector pinout
Replies: 2
Views: 831

Re: Euchner GMOX ASi Gateway RS232 connector pinout

Hello,

my last post was wrong - it is the profibus connector - I will look for the Diagnostics interface tomorrow
by georg_demmler
Fri Mar 04, 2022 5:14 pm
Forum: Other PLC
Topic: Euchner GMOX ASi Gateway RS232 connector pinout
Replies: 2
Views: 831

Re: Euchner GMOX ASi Gateway RS232 connector pinout

Hello, are your sure with 6 pin - I found something with 9 pin PIN Designation of the D-SUB connector Pin 3 Data line B („RxD/TxD-P“) Pin 5 DGND (0 V) Pin 6 VP / +5 V Pin 8 Data line A („RxD/TxD-N The AS-i/PROFIBUS gateway sends and receives signals on pins 3 and 8 of the D-SUB connector. The PROFIB...
by georg_demmler
Fri Mar 04, 2022 4:55 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Input does not work in program
Replies: 6
Views: 1434

Re: Input does not work in program

Hello,

now I understand - but it's not working.

Look the LED of the input channel need 24V DC power. I think it's not working. LED need power and there is power if the input is active.

Thanks
by georg_demmler
Thu Mar 03, 2022 6:18 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: Input does not work in program
Replies: 6
Views: 1434

Re: Input does not work in program

Hello,

some questions

- did you measure the voltage on your input channel - 24VDC whan signal is active
- did you take another input channel
- did you connect DCCOM1 and DCCOM2 with - (minus) of your power supply.

Thanks
by georg_demmler
Fri Feb 25, 2022 4:32 pm
Forum: SIMATIC system
Topic: Help STL temporary local data simatic manager
Replies: 12
Views: 2116

Re: Help STL temporary local data simatic manager

Hello,

L DBW 378 -- is a bad style

better you write

L DB 132.DBW378

Thanks
by georg_demmler
Fri Feb 25, 2022 7:28 am
Forum: SIMATIC system
Topic: Help STL temporary local data simatic manager
Replies: 12
Views: 2116

Re: Help STL temporary local data simatic manager

Hello, thank you very much. The code-lines in your first post is in the FC70. And #INO is an input parameter. The FC70 will called in FB120 - Network 10. And here you can see, that INO has the value of 122 - you open in FC70 the DB 122. You can find out with Refernce list. But without any symbolic l...
by georg_demmler
Thu Feb 24, 2022 4:53 pm
Forum: SIMATIC system
Topic: Help STL temporary local data simatic manager
Replies: 12
Views: 2116

Re: Help STL temporary local data simatic manager

Hello, The DB-number comes from #INO Because L #INO T #TEMP98 You have to look at the interface of the fb - what is #INO - Input, Output, IN_OUT, STAT, TEMP? IF #INO is an Input / IN_OUT than it is definied in your main-program. If it is definied as STAT or TEMP than you have to find a place like L....
by georg_demmler
Thu Feb 24, 2022 12:47 pm
Forum: SIMATIC system
Topic: Help STL temporary local data simatic manager
Replies: 12
Views: 2116

Re: Help STL temporary local data simatic manager

Hello,

don't know to understand your question - but you can take sfc 24 "Test_DB". This sfc check if the db is in the program / CPU or not.

Hope this helps
by georg_demmler
Thu Feb 10, 2022 5:18 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: BOOTP mac address can't show problem
Replies: 13
Views: 2710

Re: BOOTP mac address can't show problem

Hello,

nice to hear.

Thanks
by georg_demmler
Wed Feb 09, 2022 10:12 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: BOOTP mac address can't show problem
Replies: 13
Views: 2710

Re: BOOTP mac address can't show problem

Hello, I found this: Procedures for obtaining COM port number can be applied based on Operating Systems. For Windows XP: Right mouse click on My Computer and choose Properties. Go to the Hardware tab. Click on Device Manager. In the list of devices scroll down to Ports (COM and LPT) and expand it. Y...
by georg_demmler
Wed Feb 09, 2022 9:59 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: BOOTP mac address can't show problem
Replies: 13
Views: 2710

Re: BOOTP mac address can't show problem

Hello, I look for your message - and that shows - cable not correct or usb - seriell connection is not working. The pins of the cable are: 2 - 2 3 - 3 4 - 4 5 - 5 7 - 7 8 - 8 For the seriell - usb you need some configuration in the settings of the computer. That means there is a point, that COM1 is ...
by georg_demmler
Mon Feb 07, 2022 5:49 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: BOOTP mac address can't show problem
Replies: 13
Views: 2710

Re: BOOTP mac address can't show problem

Hello,

the Compact logix 1769-L32E has already an IP-address - see the LED of MS/NS in a previous post.

So BOOTP is not working - it's only working if the part has no IP-address.

I get some information from Rockwell tomorrow or on Wednesday and I write i here.

Thanks

George
by georg_demmler
Fri Feb 04, 2022 2:08 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: BOOTP mac address can't show problem
Replies: 13
Views: 2710

Re: BOOTP mac address can't show problem

Hello, yes it's not so easy to find out the address. One method for determining the IP address of an unknown device on a small known-scope system is to use Wireshark to listen to the traffic or for ARP packets when the device joins the network (cycling power usually gives you a good starting point)....
by georg_demmler
Wed Feb 02, 2022 1:20 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: BOOTP mac address can't show problem
Replies: 13
Views: 2710

Re: BOOTP mac address can't show problem

Hello,

how are the LEDs of MS and NS?

Off, Green, Flashing green, Steady green ?

Thansk

gd
by georg_demmler
Thu Apr 23, 2020 4:47 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Studio Logix 5000 v21 incomplete installation
Replies: 1
Views: 2130

Re: Studio Logix 5000 v21 incomplete installation

Hello,

I'm not sure - but can you try it with Windows 7 32/64 bit.

XP is not compatible with Rockwell V21.

George
by georg_demmler
Sun Feb 16, 2020 10:12 am
Forum: Allen-Bradley (Rockwell Automation)
Topic: rsview32 7.5 crack
Replies: 2
Views: 3415

Re: rsview32 7.5 crack

Hello,

did you check the system-requirements for RSView32 7.5. Last Version is Win7 32-Bit. Did you try to install under Win10 ????

Take a VM with XP - VirtualBox oder VMWare.

Thanks
by georg_demmler
Fri Jan 10, 2020 5:15 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Problem to read Pulses (Encoder) using 1734-VHSC24 and CompactLogix L19ER-BB1B
Replies: 1
Views: 2951

Re: Problem to read Pulses (Encoder) using 1734-VHSC24 and CompactLogix L19ER-BB1B

Hello,

please check the RPI - 2ms is to fast - check it with 10ms, 20ms and 50ms.

Greetings
by georg_demmler
Sun Apr 28, 2019 3:47 pm
Forum: SIMATIC system
Topic: SIEMENS TCSB V3.1 Problem - help needed - URGENT!
Replies: 3
Views: 3851

Re: SIEMENS TCSB V3.1 Problem - help needed - URGENT!

Hello,

I found in a german manual - for TCSB you need Microsoft Windows 10 Professional, Enterprise (64 Bit, Version 1703)

And this is German:

Für TCSB V3.1 +Update 1 gelten folgende Betriebssystemfreigaben:

Windows 10 Pro, Enterprise Version 1703 (64 Bit)

Hope this helps
by georg_demmler
Sat Mar 23, 2019 9:04 am
Forum: SIMATIC system
Topic: OPENING A STEP 5 FILE
Replies: 5
Views: 2871

Re: OPENING A STEP 5 FILE

Hello, you don't need Step5 software. Install S7-Software on your computer. Step7 has an converter from S5 to S7. You find links for S7-Software in this forum. In the S7-Software there is a S5-converter. Here is a link to a docment (in German) https://cache.industry.siemens.com/dl/files/413/1118413/...
by georg_demmler
Tue May 29, 2018 1:04 pm
Forum: Allen-Bradley (Rockwell Automation)
Topic: Communication between 2 ControlLogix
Replies: 1
Views: 1866

Re: Communication between 2 ControlLogix

Hello, my short question is - is System A also working as part of the redundant system. Here is an remark from rockwell The only Standard Redundancy allowing 1756-RM2 is 16.057Standard _Kit1 which works only with 1756-L6x controllers. And your controller in system B is a 1757-L55. I'm not sure, that...