PLCforum.uz.ua

SHKODRAN

tienthien94 wrote: ↑
Mon Jan 11, 2021 2:58 pm
please, everyone hepl me, crack main password & funtion block password. thank you so much
https://drive.google.com/file/d/1O9j-PK ... sp=sharing

password: 27091994

SHKODRAN

javad_fathi wrote: ↑
Sun Jan 10, 2021 6:10 am
Can you help me open it
https://www.sendspace.com/file/iqaqqe

There is nothing to open!

SHKODRAN

I'm sorry, never can be public.

Regards.

SHKODRAN

euovitoteu wrote: ↑
Mon Dec 21, 2020 12:30 pm
Thank you very much. It was a typo

Could you help me with another one, please?
https://drive.google.com/file/d/1pLYSDo ... sp=sharing

Your password is: simonete

Regards.

SHKODRAN

Hi guys. My first post here. Thank you for such amount of free info. I made a FB which converts drying time in minutes into Hz for a dryer and I forgot the password. (wow) Now I need to modify it and I can't. :( I tried with OllyDBG but I am not used to the software and I don't know how to use it. ...

SHKODRAN

https://drive.google.com/drive/folders/0BwBIQzfxg9Wvdk9pemVEY2twSWs https://drive.google.com/drive/folders/0BwBIQzfxg9Wvdk9pemVEY2twSWs hello can you help me to unlock it :D :D :D Very good, many treasures! :D :D :D :D :D :D :D Can you help me open it (clap) (clap) (clap) (clap) (clap) (clap) For b...

SHKODRAN

Here you go.

Spoiler

Show

5000 v32: https://mega.nz/folder/U14VlQaS#q-ktDeuss2UBYDsg3hQtWw
5000 v33: https://mega.nz/folder/RxQzwCiB#uY8IJh9EeOBhrxjsJUx7vQ

SHKODRAN

Where is the link?

SHKODRAN

Hi everyone, I found this thread (http://plcforum.uz.ua/viewtopic.php?f=11&t=25402) on my search for a solution for unlocking some FBs in CX Programmer. Unfortunately I cannot upload the CX project files, so maybe someone can upload an "Step by Step How To" for unlocking FBs using OllyDbg as descri...

SHKODRAN

killer0000007 wrote: ↑
Thu Jun 04, 2020 8:06 am
Hi guys!!
Anyone Can find me the "Horloge" Omron FB Password please?

omronf

SHKODRAN

Robodude64 wrote: ↑
Wed Oct 21, 2020 5:20 pm
Can you help me with the password for this cxp file?

15240

SHKODRAN

Hi everyone, I found this thread (http://plcforum.uz.ua/viewtopic.php?f=11&t=25402) on my search for a solution for unlocking some FBs in CX Programmer. Unfortunately I cannot upload the CX project files, so maybe someone can upload an "Step by Step How To" for unlocking FBs using OllyDbg as descri...

SHKODRAN

alf393 wrote: ↑
Tue Oct 20, 2020 3:59 pm
Here is the project.

https://mega.nz/file/75YkTbKL#6wCFGVy8b ... AkdV5AEZXQ

Is not the zenOn projetc.
You have copy the entire folder of wince cf card.

Regards.

SHKODRAN

alf393 wrote: ↑
Tue Oct 20, 2020 1:57 pm
Try this link for yourself.ç:

https://mega.nz/file/asIViQyD#BxFU79Jt2 ... cM7dMvEemw

Thanks you.

Dear,

these are not the project file.
In this folder are the compiled runtime file.
So, you need the zenon project to be able to edit.

SHKODRAN

alf393 wrote: ↑
Tue Oct 20, 2020 1:32 pm
Attached download link.

https://mega.nz/fm/P54GHCyB

Thanks you very much

Hello.
I'm not able to download nothing from this link, can you double check?

Thanks.

SHKODRAN

alf393 wrote: ↑
Tue Oct 20, 2020 10:03 am
I need to open a .prj Ver. 6.20 SP4 from a KOSME HMI.

Can somebody help me.
I have Zenon Ver 6.21 SP1

Upload your project somewhere anche post the link for download.

Regards.

SHKODRAN

wangrenzhi wrote: ↑
Fri Oct 09, 2020 7:53 am

SHKODRAN wrote: ↑
Thu Oct 08, 2020 10:11 pm
Hello.

https://vimeo.com/466354619

Regards.
Can't download, can change other network disk

Hello.

This is only the video demonstration of working license on these version.
Please, contact team-uare directly for any further information.

Regards.

SHKODRAN

Hello.

https://vimeo.com/466354619

For any information, please contact directly Team-Uare at: team-uare@yandex.com

Regards.

SHKODRAN

Hello!
Can you post some more info concerning your request?
What kind of mmc, sd card, cf card, cfast you want to read?
Post also some pictures.

Regards.

SHKODRAN

yolk wrote: ↑
Fri Sep 11, 2020 2:51 pm
I rather prefer to send link on PM if some one will be interested to unpassword it.

Send on my PM

SHKODRAN

yolk wrote: ↑
Fri Sep 11, 2020 9:57 am

Still HMI need's unpasswording.
If it will be necessary I can pay for unpasswording, please contact me on PM.

Upload the project somewhere, and post the link.
Regards.

SHKODRAN

Hi,
here the link of restored workspace.

Code: Select all

https://mega.nz/file/eeZiwY7L#w1vpIk431STv8QP8XsmJneMNMf8UKVJJ0qdhKjH5zYs

Password PM.

SHKODRAN

Upload somewhere your project files, share with us the link, we can help you.

SHKODRAN

What can you do with WinSPS-S7 V6? You can write your STEP7 program in STL, FBD or LAD. After this you can upload the written blocks to the on-board Software-PLC to simulate your program. Use the PLC Mask window to change the state of the digital and analog inputs and watch the results.... https://s...

SHKODRAN

brunoribas wrote: ↑
Fri Aug 14, 2020 12:14 pm
Pessoal preciso do zenon 7.1, alguém poderia colocar um link para download?Agradeço pela ajuda!

When you write in English, you will have the answer.

SHKODRAN

Hi there! I see that you are not very updated on this. In version 6.2x, the vba management was totally clear, since no protection could be used. Instead with the current versions, from 7.xx to the most recent 8.20, the vba are encrypted, so it requires a lot of work than you think. The user has alre...

SHKODRAN

If you just want the alarms and corresponding PLC tag in most cases it will show on the HMI Exporting and importing Language files in txt format is normally also possible from Krones HMI, in some systems even edit the alarm text and help text directly at the HMI. The prj files are a ZIP archive wit...

SHKODRAN

The prj backup of krones are compiled files, not the development project. Krones distributes it for a possible recovery in case of data loss on hmi. To restore these you may need: 1) Krones Explorer; 2) Zenon Supervisor 7.2 with unlimited tag license; 3) Good experience with zenOn development; 4) A ...

SHKODRAN

My answer was referred to you, who don't even have the tools.
The complexity of transforming from an old project to the current version also depends on how prepared you are in zenon.

SHKODRAN

What you ask for is almost impossible.
I suggest you contact someone in the area, zenon expert to do the job. The new project will be done, importing some information from the old project.

SHKODRAN

info@elcoelettronica.it

SHKODRAN

The forum is open to everyone, everyone will have the answer. When it comes to developing software, which the people you paid were supposed to do, nobody will be available for free. You asked to unpack the krones source, you were satisfied, therefore, I would say that the community has done its duty...

SHKODRAN

Are you a krones customer? why don't you ask them how they thought about exporting the alarms?
I personally do not have time to follow the krones project to satisfy your requests and waste my time in nothing.

SHKODRAN

Hello everyone.

I received an email from the team-uare group announcing the group's closure.

For all those who need to have the license, with a small donation they activate all versions from 6.00 to 7.60
I have proven their seriousness, I can guarantee you maximum professional.

Regards.

SHKODRAN

Hello,
you con dowload from here windows 7 embedeed.
https://www.microsoft.com/en-us/downloa ... x?id=11887

Regards.

SHKODRAN

From version 6.22 you can convert to version 7.00, but vice versa NO.

SHKODRAN

Here you can download the workspace's for both files. Bas & MMA was generated with version 6.20, i don't use this old version, I converted both to 7.00 You can restore edit e do what you want. http://www.mediafire.com/file/fudj0mdhmu7o2tp/995P4E_2012-04-25_081450.zip/file http://www.mediafire.com/fi...

SHKODRAN

Post your code, someone can help you.

SHKODRAN

The file will not be public.
When it is fully functional in every aspect, I will tell you where to request to unlock.

SHKODRAN

Hi,
Right now in the hands of those who patched it.
It will not be public, as it should be.

SHKODRAN

Hi,
Upload your project somewhere, i'll do for you.

Regards.

SHKODRAN

Link is working properly.

Spoiler

Show

https://ibb.co/ThPDLGX

https://vk.com/video439682812_456239086

Regards.

SHKODRAN

Very probably on a fake. Here if after that also the block was opened in the editor. I when investigated protection too was got "protection removals", but the block really did not open Hi, are you sure ? I have tried it and I guarantee that it works properly. Do not forget that if you have not succ...

SHKODRAN

something interesting.
Team-Uare has already decrypted it.

New link: video
http://www.mediafire.com/file/6k491j46r ... P.mov/file

replace S7BLPAX.EXE by patched_S7BLPAX.EXE

SHKODRAN

Dear Jerry44,

with trial version of zenOn editor, you can't edit this work space, due to Krones, use macro registered.
Anyway, the second problem, i don't use 7.10, i can restore the project for version 7.60 , 8.00 or 8.10.

Regards.

SHKODRAN

ykr1989 wrote: ↑
Sun Aug 25, 2019 7:20 pm
Hello,
please somebody can give me the direct link download of zenon 5.5 SP7 /

i have the zenon 6.20 SP1 but i am not able to open my projet build with zenon 5.5 SP7.

Hello.
Upload somewhere your 5.5 sp7 project, i'll adapt to 6.20 for you.

Regards.

SHKODRAN

Here you go: https://rapidgator.net/file/e767056175b15b51cc056d06584f6ab7/Scada700.part5.rar.html https://rapidgator.net/file/96c1fbed794c8e9dbfcf865373eb9a1c/Scada700.part1.rar.html https://rapidgator.net/file/86e5994de6fd315c6c2ca1513d654cd2/Scada700.part2.rar.html https://rapidgator.net/file/9714...

SHKODRAN

Here you go.
http://www.mediafire.com/file/if5b1i92v ... s.zip/file
Editor: zenOn V7.0
Runtime: zenOn V6.20 SP1

If you edit these two workspace with zenOn 7.0, you're able to compile the file runtime for 6.20 sp4 that can work wothout problems on Krones HMI,

Regards.

SHKODRAN

All links are into rapidgator server.

regards.

SHKODRAN

In the first post!

Search found 133 matches